arXiv++ Combinatorics

The nonnegative integer rank of a matrix is a variant of the classical nonnegative rank, introduced in the 1980s, where factorizations are required to have integer entries. While computing nonnegative integer rank is generally very hard, we focus on a fundamental special case: determining when a rank 2 nonnegative integer matrix has nonnegative integer rank equal to 2 (the "rank2 problem"). Although this problem is trivial in the continuous case, in this context it is surprisingly rich. We provide a geometric reformulation in terms of affine semigroups and rational cones in the plane, which yields new structural insights. We show that any rank 2 integer matrix can be reduced to a $3\times 3$ matrix which has nonnegative integer rank $2$ if and only if the original one also has nonnegative integer rank $2$, with the reduction computable in polynomial time. This reduction reveals that the difficulty of the rank2 problem is already captured by small matrices. Building on this geometric framework, we also develop an algorithm that solves the rank2 problem by strategically searching for integer generators within bounded regions of the associated cone. Although the theoretical worst-case complexity remains high, numerical experiments demonstrate that the algorithm performs efficiently in practice.

A polytope is inscribable if there is a realization where all vertices lie on the sphere. In this paper, we provide a necessary and sufficient condition for a polytope to be inscribable. Based on this condition, we characterize the problem of determining inscribability as a minimum rank optimization problem using slack matrices. We propose an SDP approximation for the minimum rank optimization problem and prove that it is tight for certain classes of polytopes. Given a polytope, we provide three algorithms to determine its inscribability. All the optimization problems and algorithms we propose in this paper depend on the number of vertices and facets but are independent of the dimension of the polytope. Numerical results demonstrate our SDP approximation's efficiency, accuracy, and robustness for determining inscribability of simplicial polytopes of dimensions $4\le d\le 8$ with vertices $n\le 10$, revealing its potential in high dimensions.

Yannakakis' theorem relating the extension complexity of a polytope to the size of a nonnegative factorization of its slack matrix is a seminal result in the study of lifts of convex sets. Inspired by this result and the importance of lifts in the setting of integer programming, we show that a similar result holds for the discrete analog of convex polyhedral cones-affine semigroups. We define the notions of the integer slack matrix and a lift of an affine semigroup. We show that many of the characterizations of the slack matrix in the convex cone setting have analogous results in the affine semigroup setting. We also show how slack matrices of affine semigroups can be used to obtain new results in the study of nonnegative integer rank of nonnegative integer matrices.

In this paper we present a simple technique to derive certificates of non-realizability for an abstract polytopal sphere. Our approach uses a variant of the classical algebraic certificates introduced by Bokowski and Sturmfels in [Computational Synthetic Geometry, 1989], the final polynomials. More specifically we reduce the problem of finding a realization to that of finding a positive point in a variety and try to find a polynomial with positive coefficients in the generating ideal (a positive polynomial), showing that such point does not exist. Many, if not most, of the techniques for proving non-realizability developed in the last three decades can be seen as following this framework, using more or less elaborate ways of constructing such positive polynomials. Our proposal is more straightforward as we simply use linear programming to exhaustively search for such positive polynomials in the ideal restricted to some linear subspace. Somewhat surprisingly, this elementary strategy yields results that are competitive with more elaborate alternatives, and allows us to derive new examples of non-realizable abstract polytopal spheres.

In this paper we use a generating function approach to record and calculate entries of the Minkowski tensors of a polytope. We focus on ''surface tensors'', extending the methods used in arXiv:1807.10258 for moments of the uniform distribution which correspond to volume tensors. In this context we also extend the definition of the adjoint polynomial to the boundary complex of a polytope with simplicial facets. In the case of simplicial polytopes we give an explicit formulation for these surface tensors.

Recently Gouveia, Thomas and the authors introduced the slack realization space, a new model for the realization space of a polytope. It represents each polytope by its slack matrix, the matrix obtained by evaluating each facet inequality at each vertex. Unlike the classical model, the slack model naturally mods out projective transformations. It is inherently algebraic, arising as the positive part of a variety of a saturated determinantal ideal, and provides a new computational tool to study classical realizability problems for polytopes. We introduce the package SlackIdeals for Macaulay2, that provides methods for creating and manipulating slack matrices and slack ideals of convex polytopes and matroids. Slack ideals are often difficult to compute. To improve the power of the slack model, we develop two strategies to simplify computations: we scale as many entries of the slack matrix as possible to one; we then obtain a reduced slack model combining the slack variety with the more compact Grassmannian realization space model. This allows us to study slack ideals that were previously out of computational reach. As applications, we show that the well-known Perles polytope does not admit rational realizations and prove the non-realizability of a large quasi-simplicial sphere.

In this paper we examine four different models for the realization space of a polytope: the classical model, the Grassmannian model, the Gale transform model, and the slack variety. Respectively, they identify realizations of the polytopes with the matrix whose columns are the coordinates of their vertices, the column space of said matrix, their Gale transforms, and their slack matrices. Each model has been used to study realizations of polytopes. In this paper we establish very explicitly the maps that allow us to move between models, study their precise relationships, and combine the strengths of different viewpoints. As an illustration, we combine the compact nature of the Grassmannian model with the slack variety to obtain a reduced slack model that allows us to perform slack ideal calculations that were previously out of computational reach. These calculations allow us to answer the question of [Criado, Santos. Topological prismatoids and small simplicial spheres of large diameter. Experimental Mathematics, 1-13, 2019], about the realizability of a family of prismatoids, in general in the negative by proving the non-realizability of one of them.

The slack ideal of a polytope is a saturated determinantal ideal that gives rise to a new model for the realization space of the polytope. The simplest slack ideals are toric and have connections to projectively unique polytopes. We prove that if a projectively unique polytope has a toric slack ideal, then it is the toric ideal of the bipartite graph of vertex-facet non-incidences of the polytope. The slack ideal of a polytope is contained in this toric ideal if and only if the polytope is morally 2-level, a generalization of the 2-level property in polytopes. We show that polytopes that do not admit rational realizations cannot have toric slack ideals. A classical example of a projectively unique polytope with no rational realizations is due to Perles. We prove that the slack ideal of the Perles polytope is reducible, providing the first example of a slack ideal that is not prime.

We introduce a new model for the realization space of a matroid, which is obtained from a variety defined by a saturated determinantal ideal, called the slack ideal, coming from the vertex-hyperplane incidence matrix of the matroid. This is inspired by a similar model for the slack realization space of a polytope. We show how to use these ideas to certify non-realizability of matroids, and describe an explicit relationship to the standard Grassmann-Plücker realization space model. We also exhibit a way of detecting projectively unique matroids via their slack ideals by introducing a toric ideal that can be associated to any matroid.

In this paper we introduce a natural model for the realization space of a polytope up to projective equivalence which we call the slack realization space of the polytope. The model arises from the positive part of an algebraic variety determined by the slack ideal of the polytope. This is a saturated determinantal ideal that encodes the combinatorics of the polytope. We also derive a new model of the realization space of a polytope from the positive part of the variety of a related ideal. The slack ideal offers an effective computational framework for several classical questions about polytopes such as rational realizability, non-prescribability of faces, and realizability of combinatorial polytopes.

Large sets of equiangular lines are constructed from sets of mutually unbiased bases, over both the complex and the real numbers.

A set of vectors of equal norm in $\mathbb{C}^d$ represents equiangular lines if the magnitudes of the Hermitian inner product of every pair of distinct vectors in the set are equal. The maximum size of such a set is $d^2$, and it is conjectured that sets of this maximum size exist in $\mathbb{C}^d$ for every $d \geq 2$. We take a combinatorial approach to this conjecture, using mutually unbiased bases (MUBs) in the following 3 constructions of equiangular lines: (1) adapting a set of $d$ MUBs in $\mathbb{C}^d$ to obtain $d^2$ equiangular lines in $\mathbb{C}^d$, (2) using a set of $d$ MUBs in $\mathbb{C}^d$ to build $(2d)^2$ equiangular lines in $\mathbb{C}^{2d}$, (3) combining two copies of a set of $d$ MUBs in $\mathbb{C}^d$ to build $(2d)^2$ equiangular lines in $\mathbb{C}^{2d}$. For each construction, we give the dimensions $d$ for which we currently know that the construction produces a maximum-sized set of equiangular lines.

A set of vectors of equal norm in $\mathbb{C}^d$ represents equiangular lines if the magnitudes of the inner product of every pair of distinct vectors in the set are equal. The maximum size of such a set is $d^2$, and it is conjectured that sets of this maximum size exist in $\mathbb{C}^d$ for every $d \geq 2$. We describe a new construction for maximum-sized sets of equiangular lines, exposing a previously unrecognized connection with Hadamard matrices. The construction produces a maximum-sized set of equiangular lines in dimensions 2, 3 and 8.