arXiv++ Combinatorics

Let $P$ be a set of points and $L$ a set of lines in the (extended) Euclidean plane, and $I \subseteq P\times L$, where $i =(p,l) \in I$ means that point $p$ and line $l$ are incident. The incidences can be interpreted as quadratic constraints on the homogeneous coordinates of the points and lines. We study the space of incidence preserving motions of the given incidence structure by linearizing the system of quadratic equations. The Jacobian of the quadratic system, our projective rigidity matrix, leads to the notion of independence/dependence of incidences. Column dependencies correspond to infinitesimal motions. Row dependencies or self-stresses allow for new interpretations of classical geometric incidence theorems. We show that self-stresses are characterized by a 3-fold balance. As expected, infinitesimal (first order) projective rigidity as well as second order projective rigidity imply projective rigidity but not conversely. Several open problems and possible generalizations are indicated.

In this paper, we establish a general setup for studying incidence-preserving motions of projective geometric configurations of points and lines via a "projective rigidity matrix". The spaces of infinitesimal motions of a point-line configuration and dependencies amongst the point-line incidences can be interpreted as the kernel and co-kernel of this projective rigidity matrix, respectively. We also introduce a symmetry-adapted projective rigidity matrix for analysing symmetric configurations and their symmetry-preserving motions. The symmetry may be a point group or a more general symmetry, such as an autopolarity.

In this paper we consider the effect of symmetry on the rigidity of bar-joint frameworks, spherical frameworks and point-hyperplane frameworks in $\mathbb{R}^d$. In particular we show that, under forced or incidental symmetry, infinitesimal rigidity for spherical frameworks with vertices in $X$ on the equator and point-hyperplane frameworks with the vertices in $X$ representing hyperplanes are equivalent. We then show, again under forced or incidental symmetry, that infinitesimal rigidity properties under certain symmetry groups can be paired, or clustered, under inversion on the sphere so that infinitesimal rigidity with a given group is equivalent to infinitesimal rigidity under a paired group. The fundamental basic example is that mirror symmetric rigidity is equivalent to half-turn symmetric rigidity on the 2-sphere. With these results in hand we also deduce some combinatorial consequences for the rigidity of symmetric bar-joint and point-line frameworks.

A one-to-one correspondence between the infinitesimal motions of bar-joint frameworks in $\mathbb{R}^d$ and those in $\mathbb{S}^d$ is a classical observation by Pogorelov, and further connections among different rigidity models in various different spaces have been extensively studied. In this paper, we shall extend this line of research to include the infinitesimal rigidity of frameworks consisting of points and hyperplanes. This enables us to understand correspondences between point-hyperplane rigidity, classical bar-joint rigidity, and scene analysis. Among other results, we derive a combinatorial characterization of graphs that can be realized as infinitesimally rigid frameworks in the plane with a given set of points collinear. This extends a result by Jackson and Jordán, which deals with the case when three points are collinear.

A rigidity theory is developed for bar-joint frameworks in $\mathbb{R}^{d+1}$ whose vertices are constrained to lie on concentric $d$-spheres with independently variable radii. In particular, combinatorial characterisations are established for the rigidity of generic frameworks for $d=1$ with an arbitrary number of independently variable radii, and for $d=2$ with at most two variable radii. This includes a characterisation of the rigidity or flexibility of uniformly expanding spherical frameworks in $\mathbb{R}^{3}$. Due to the equivalence of the generic rigidity between Euclidean space and spherical space, these results interpolate between rigidity in 1D and 2D and to some extent between rigidity in 2D and 3D. Symmetry-adapted counts for the detection of symmetry-induced continuous flexibility in frameworks on spheres with variable radii are also provided.

Assur graphs are a tool originally developed by mechanical engineers to decompose mechanisms for simpler analysis and synthesis. Recent work has connected these graphs to strongly directed graphs, and decompositions of the pinned rigidity matrix. Many mechanisms have initial configurations which are symmetric, and other recent work has exploited the orbit matrix as a symmetry adapted form of the rigidity matrix. This paper explores how the decomposition and analysis of symmetric frameworks and their symmetric motions can be supported by the new symmetry adapted tools.

The decomposition of a linkage into minimal components is a central tool of analysis and synthesis of linkages. In this paper we prove that every pinned d-isostatic (minimally rigid) graph (grounded linkage) has a unique decomposition into minimal strongly connected components (in the sense of directed graphs), or equivalently into minimal pinned isostatic graphs, which we call d-Assur graphs. We also study key properties of motions induced by removing an edge in a d-Assur graph - defining a stronger sub-class of strongly d-Assur graphs by the property that all inner vertices go into motion, for each removed edge. The strongly 3-Assur graphs are the central building blocks for kinematic linkages in 3-space and the 3-Assur graphs are components in the analysis of built linkages. The d-Assur graphs share a number of key combinatorial and geometric properties with the 2-Assur graphs, including an associated lower block- triangular decomposition of the pinned rigidity matrix which provides modular information for extending the motion induced by inserting one driver in a bottom Assur linkage to the joints of the entire linkage. We also highlight some problems in combinatorial rigidity in higher dimensions (d > 2) which cause the distinction between d-Assur and strongly d-Assur which did not occur in the plane.

Recent work from authors across disciplines has made substantial contributions to counting rules (Maxwell type theorems) which predict when an infinite periodic structure would be rigid or flexible while preserving the periodic pattern, as an engineering type framework, or equivalently, as an idealized molecular framework. Other work has shown that for finite frameworks, introducing symmetry modifies the previous general counts, and under some circumstances this symmetrized Maxwell type count can predict added finite flexibility in the structure. In this paper we combine these approaches to present new Maxwell type counts for the columns and rows of a modified orbit matrix for structures that have both a periodic structure and additional symmetry within the periodic cells. In a number of cases, this count for the combined group of symmetry operations demonstrates there is added finite flexibility in what would have been rigid when realized without the symmetry. Given that many crystal structures have these added symmetries, and that their flexibility may be key to their physical and chemical properties, we present a summary of the results as a way to generate further developments of both a practical and theoretic interest.

A number of recent papers have studied when symmetry causes frameworks on a graph to become infinitesimally flexible, or stressed, and when it has no impact. A number of other recent papers have studied special classes of frameworks on generically rigid graphs which are finite mechanisms. Here we introduce a new tool, the orbit matrix, which connects these two areas and provides a matrix representation for fully symmetric infinitesimal flexes, and fully symmetric stresses of symmetric frameworks. The orbit matrix is a true analog of the standard rigidity matrix for general frameworks, and its analysis gives important insights into questions about the flexibility and rigidity of classes of symmetric frameworks, in all dimensions. With this narrower focus on fully symmetric infinitesimal motions, comes the power to predict symmetry-preserving finite mechanisms - giving a simplified analysis which covers a wide range of the known mechanisms, and generalizes the classes of known mechanisms. This initial exploration of the properties of the orbit matrix also opens up a number of new questions and possible extensions of the previous results, including transfer of symmetry based results from Euclidean space to spherical, hyperbolic, and some other metrics with shared symmetry groups and underlying projective geometry.

A significant range of geometric structures whose rigidity is explored for both practical and theoretical purposes are formed by modifying generically isostatic triangulated spheres. In the block and hole structures (P, p), some edges are removed to make holes, and other edges are added to create rigid sub-structures called blocks. Previous work noted a combinatorial analogy in which blocks and holes played equivalent roles. In this paper, we connect stresses in such a structure (P, p) to first-order motions in a swapped structure (P', p), where holes become blocks and blocks become holes. When the initial structure is geometrically isostatic, this shows that the swapped structure is also geometrically isostatic, giving the strongest possible correspondence. We use a projective geometric presentation of the statics and the motions, to make the key underlying correspondences transparent.

Maxwell's rule from 1864 gives a necessary condition for a framework to be isostatic in 2D or in 3D. Given a framework with point group symmetry, group representation theory is exploited to provide further necessary conditions. This paper shows how, for an isostatic framework, these conditions imply very simply stated restrictions on the numbers of those structural components that are unshifted by the symmetry operations of the framework. In particular, it turns out that an isostatic framework in 2D can belong to one of only six point groups. Some conjectures and initial results are presented that would give sufficient conditions (in both 2D and 3D) for a framework that is realized generically for a given symmetry group to be an isostatic framework.

In our previous paper, we presented the combinatorial theory for minimal isostatic pinned frameworks - Assur graphs - which arise in the analysis of mechanical linkages. In this paper we further explore the geometric properties of Assur graphs, with a focus on singular realizations which have static self-stresses. We provide a new geometric characterization of Assur graphs, based on special singular realizations. These singular positions are then related to dead-end positions in which an associated mechanism with an inserted driver will stop or jam.

We introduce the idea of Assur graphs, a concept originally developed and exclusively employed in the literature of the kinematics community. The paper translates the terminology, questions, methods and conjectures from the kinematics terminology for one degree of freedom linkages to the terminology of Assur graphs as graphs with special properties in rigidity theory. Exploiting recent works in combinatorial rigidity theory we provide mathematical characterizations of these graphs derived from minimal linkages. With these characterizations, we confirm a series of conjectures posed by Offer Shai, and offer techniques and algorithms to be exploited further in future work.

These pages serve two purposes. First, they are notes to accompany the talk "Hyperbolic and projective geometry in constraint programming for CAD" by Walter Whiteley at the "Janos Bolyai Conference on Hyperbolic Geometry", 8--12 July 2002, in Budapest, Hungary. Second, they sketch results that will be included in a forthcoming paper that will present the equivalence of the first-order rigidity theories of bar-and-joint frameworks in various geometries, including Euclidean, hyperbolic and spherical geometry. The bulk of the theory is outlined here, with remarks and comments alluding to other results that will make the final version of the paper.

We study non-crossing frameworks in the plane for which the classical reciprocal on the dual graph is also non-crossing. We give a complete description of the self-stresses on non-crossing frameworks whose reciprocals are non-crossing, in terms of: the types of faces (only pseudo-triangles and pseudo-quadrangles are allowed); the sign patterns in the self-stress; and a geometric condition on the stress vectors at some of the vertices. As in other recent papers where the interplay of non-crossingness and rigidity of straight-line plane graphs is studied, pseudo-triangulations show up as objects of special interest. For example, it is known that all planar Laman circuits can be embedded as a pseudo-triangulation with one non-pointed vertex. We show that if such an embedding is sufficiently generic, then the reciprocal is non-crossing and again a pseudo-triangulation embedding of a planar Laman circuit. For a singular (i.e., non-generic) pseudo-triangulation embedding of a planar Laman circuit, the reciprocal is still non-crossing and a pseudo-triangulation, but its underlying graph may not be a Laman circuit. Moreover, all the pseudo-triangulations which admit a non-crossing reciprocal arise as the reciprocals of such, possibly singular, stresses on pseudo-triangulation embeddings of Laman circuits. All self-stresses on a planar graph correspond to liftings to piece-wise linear surfaces in 3-space. We prove characteristic geometric properties of the lifts of such non-crossing reciprocal pairs.

Pointed pseudo-triangulations are planar minimally rigid graphs embedded in the plane with pointed vertices (adjacent to an angle larger than 180 degrees. In this paper we prove that the opposite statement is also true, namely that planar minimally rigid graphs always admit pointed embeddings, even under certain natural topological and combinatorial constraints. We provide two proofs, which both yield efficient embedding algorithms. One based on Henneberg inductive constructions from combinatorial rigidity theory, the other on a generalization of Tutte's barycentric embeddings to directed graphs.