d-polytope
34 papers tagged with this keyword
String C-groups of 2-power order project onto a common string C-group
String C-groups are precisely the automorphism groups of abstract regular polytopes. A certain regular d-polytope C_d with an automorphism group of order 2^{2d-1}, discovered by Conder and shown to have the smallest number of flags among all regular d-polytopes of high ranks, also has the important extremal property to be the unique minimal d-polytope, with respect to combinatorial covering, among all finite regular d-polytopes with 2-power automorphism groups. In other words, the automorphism group of C_d is a quotient group of every finite string C-group of rank d and 2-power order; and every finite regular d-polytope with an automorphism groups of 2-power order covers C_d. The existence of a unique minimal element among string C-groups of 2-power order and given rank is remarkable in itself.
Minimum number of edges of polytopes with 2d + 2 vertices
Published
• View Publication
• BIB
We define an analogue of the cube and an analogue of the 5-wedge in higher dimensions, each with $2d+2$ vertices and $d^2+2d-3$ edges. We show that these two are the only minimisers of the number of edges, amongst d-polytopes with $2d+2$ vertices, for all $d$ except 4, 5 and 7. We also show that there are four sporadic minimisers in these low dimensions. We announce a partial solution to the corresponding problem for polytopes with $2d + 3$ vertices.
The VC-dimension of k-vertex d-polytopes
Published
• View Publication
• BIB
In this short note, we show that the VC-dimension of the class of $k$-vertex polytopes in $\mathbb R^d$ is at most $8d^2k\log_2k$, answering an old question of Long and Warmuth.
All 2-neighborly d-polytopes with at most d + 9 facets
We give a complete enumeration of all 2-neighborly $d$-polytopes with $d+9$ and less facets. All of them are realized as 0/1-polytopes, except a 6-polytope $P_{6,10,15}$ with 10 vertices and 15 facets, and pyramids over $P_{6,10,15}$. In particular, we update the lower bounds for the number of facets of a 2-neighborly $d$-polytope $P$ and showed that the number of facets of $P$ is not less than the number of its vertices $f_0(P)$ for $f_0(P) \le d + 10$.
Bounds on the number of 2-level polytopes, cones and configurations
Published
• View Publication
• BIB
We prove an upper bound of the form $2^{O(d^2 \mathrm{polylog}\,d)}$ on the number of affine (resp. linear) equivalence classes of, by increasing order of generality, 2-level d-polytopes, d-cones and d-configurations. This in particular answers positively a conjecture of Bohn et al. on 2-level polytopes. We obtain our upper bound by relating affine (resp. linear) equivalence classes of 2-level d-polytopes, d-cones and d-configurations to faces of the correlation cone. We complement this with a $2^{Ω(d^2)}$ lower bound, by estimating the number of nonequivalent stable set polytopes of bipartite graphs.
The lower bound for the number of facets of a k-neighborly d-polytope with d+3 vertices
We have found the minimal difference $Δ(k) = \min\limits_P (f_{d-1}(P) - f_{0}(P))$ between the number of facets and the number of vertices of a $k$-neighborly $d$-polytope $P$ for the case $f_{0}(P) = d+3$: $Δ(2) = 4$, $Δ(3) = 15$, and $Δ(k) = 2 (k^2 - 1)$ for $k \ge 4$.
Four Dimensional Polytopes of Minimum Positive Semidefinite Rank
Published
• View Publication
• BIB
The positive semidefinite (psd) rank of a polytope is the size of the smallest psd cone that admits an affine slice that projects linearly onto the polytope. The psd rank of a d-polytope is at least d+1, and when equality holds we say that the polytope is psd-minimal. In this paper we develop new tools for the study of psd-minimality and use them to give a complete classification of psd-minimal 4-polytopes. The main tools introduced are trinomial obstructions, a new algebraic obstruction for psd-minimality, and the slack ideal of a polytope, which encodes the space of realizations of a polytope up to projective equivalence.
Our central result is that there are 31 combinatorial classes of psd-minimal 4-polytopes. We provide combinatorial information and an explicit psd-minimal realization in each class. For 11 of these classes, every polytope in them is psd-minimal, and these are precisely the combinatorial classes of the known projectively unique 4-polytopes. We give a complete characterization of psd-minimality in the remaining classes, encountering in the process counterexamples to some open conjectures.
Hidden Vertices in Extensions of Polytopes
Published
• View Publication
• BIB
Some widely known compact extended formulations have the property that each vertex of the corresponding extension polytope is projected onto a vertex of the target polytope. In this paper, we prove that for heptagons with vertices in general position none of the minimum size extensions has this property. Additionally, for any d >= 2 we construct a family of d-polytopes such that at least 1/9 of all vertices of any of their minimum size extensions is not projected onto vertices.
Chiral extensions of chiral polytopes
Published
• View Publication
• BIB
Given a chiral d-polytope K with regular facets, we describe a construction for a chiral (d + 1)-polytope P with facets isomorphic to K. Furthermore, P is finite whenever K is finite. We provide explicit examples of chiral 4-polytopes constructed in this way from chiral toroidal maps.
Valid Orderings of Real Hyperplane Arrangements
Published
• View Publication
• BIB
Given a real finite hyperplane arrangement A and a point p not on any of the hyperplanes, we define an arrangement vo(A,p), called the *valid order arrangement*, whose regions correspond to the different orders in which a line through p can cross the hyperplanes in A. If A is the set of affine spans of the facets of a convex polytope P and p lies in the interior of P, then the valid orderings with respect to p are just the line shellings of p where the shelling line contains p. When p is sufficiently generic, the intersection lattice of vo(A,p) is the *Dilworth truncation* of the semicone of A. Various applications and examples are given. For instance, we determine the maximum number of line shellings of a d-polytope with m facets when the shelling line contains a fixed point p. If P is the order polytope of a poset, then the sets of facets visible from a point involve a generalization of chromatic polynomials related to list colorings.
Explicit constructions of centrally symmetric k-neighborly polytopes and large strictly antipodal sets
Published
• View Publication
• BIB
We present explicit constructions of centrally symmetric 2-neighborly d-dimensional polytopes with about 3^{d/2} = (1.73)^d vertices and of centrally symmetric k-neighborly d-polytopes with about 2^{c_k d} vertices where c_k=3/20 k^2 2^k. Using this result, we construct for a fixed k > 1 and arbitrarily large d and N, a centrally symmetric d-polytope with N vertices that has at least (1-k^2 (gamma_k)^d) binom(N, k) faces of dimension k-1, where gamma_2=1/\sqrt{3} = 0.58 and gamma_k = 2^{-3/{20k^2 2^k}} for k > 2. Another application is a construction of a set of 3^{d/2 -1}-1 points in R^d every two of which are strictly antipodal as well as a construction of an n-point set (for an arbitrarily large n) in R^d with many pairs of strictly antipodal points. The two latter results significantly improve the previous bounds by Talata, and Makai and Martini, respectively.
Inscribable stacked polytopes
Published
• View Publication
• BIB
We characterize the combinatorial types of stacked d-polytopes that are inscribable. Equivalently, we identify the triangulations of a simplex by stellar subdivisions that can be realized as Delaunay triangulations.
Few smooth d-polytopes with n lattice points
Published in Israel J. Math., April 2015, Volume 207, Issue 1, pp 301-329
• View Publication
• BIB
We prove that, for fixed n there exist only finitely many embeddings of Q-factorial toric varieties X into P^n that are induced by a complete linear system. The proof is based on a combinatorial result that for fixed nonnegative integers d and n, there are only finitely many smooth d-polytopes with n lattice points. We also enumerate all smooth 3-polytopes with at most 12 lattice points. In fact, it is sufficient to bound the singularities and the number of lattice points on edges to prove finiteness.
Convex normality of rational polytopes with long edges
Published
• View Publication
• BIB
We introduce the property of convex normality of rational polytopes and give a dimensionally uniform lower bound for the edge lattice lengths, guaranteeing the property. As an application, we show that if every edge of a lattice d-polytope P has lattice length at least 4d(d+1) then P is normal. This answers in the positive a question raised in 2007. If P is a lattice simplex whose edges have lattice lengths at least d(d+1) then P is even covered by lattice parallelepipeds. For the approach developed here, it is necessary to involve rational polytopes even for applications to lattice polytopes.
Edge-Graph Diameter Bounds for Convex Polytopes with Few Facets
Published
• View Publication
• BIB
We show that the edge graph of a 6-dimensional polytope with 12 facets has diameter at most 6, thus verifying the d-step conjecture of Klee and Walkup in the case of d=6. This implies that for all pairs (d,n) with n-d \leq 6 the diameter of the edge graph of a d-polytope with n facets is bounded by 6, which proves the Hirsch conjecture for all n-d \leq 6. We show this result by showing this bound for a more general structure -- so-called matroid polytopes -- by reduction to a small number of satisfiability problems.
Q-factorial Gorenstein toric Fano varieties with large Picard number
Published
• View Publication
• BIB
Q-factorial Gorenstein toric Fano varieties X of dimension d with Picard number rho(X) correspond to simplicial reflexive d-polytopes with rho(X)+d vertices. Casagrande showed that any simplicial reflexive d-polytope has at most 3d vertices, if d is even, respectively, 3d-1, if d is odd. Moreover, it is known that equality for d even implies uniqueness up to unimodular equivalence. In this paper we completely classify all simplicial reflexive d-polytopes having 3d-1 vertices, corresponding to d-dimensional Q-factorial Gorenstein toric Fano varieties with Picard number 2d-1. For d even, there exist three such varieties, with two being singular, while for d odd (d > 1) there exist precisely two, both being nonsingular toric fiber bundles over the projective line. This generalizes recent work of the second author.
A characterization of simplicial polytopes with g_2=1
Kalai proved that the simplicial polytopes with g_2=0 are the stacked polytopes. We characterize the g_2=1 case. Specifically, we prove that every simplicial d-polytope (d>=4) which is prime and with g_2=1 is combinatorially equivalent either to a free sum of two simplices whose dimensions add up to d (each of dimension at least 2), or to a free sum of a polygon with a (d-2)-simplex. Thus, every simplicial d-polytope (d>=4) with g_2=1 is combinatorially equivalent to a polytope obtained by stacking over a polytope as above. Moreover, the above characterization holds for any homology (d-1)-sphere (d>=4) with g_2=1, and our proof takes advantage of working with this larger class of complexes.
Construction and Analysis of Projected Deformed Products
Published in Discrete Comput. Geom. 43 (2010), no. 2, 412-435
• View Publication
• BIB
We introduce a deformed product construction for simple polytopes in terms of lower-triangular block matrix representations. We further show how Gale duality can be employed for the construction and for the analysis of deformed products such that specified faces (e.g. all the k-faces) are ``strictly preserved'' under projection. Thus, starting from an arbitrary neighborly simplicial (d-2)-polytope Q on n-1 vertices we construct a deformed n-cube, whose projection to the last dcoordinates yields a neighborly cubical d-polytope. As an extension of thecubical case, we construct matrix representations of deformed products of(even) polygons (DPPs), which have a projection to d-space that retains the complete (\lfloor \tfrac{d}{2} \rfloor - 1)-skeleton. In both cases the combinatorial structure of the images under projection is completely determined by the neighborly polytope Q: Our analysis provides explicit combinatorial descriptions. This yields a multitude of combinatorially different neighborly cubical polytopes and DPPs. As a special case, we obtain simplified descriptions of the neighborly cubical polytopes of Joswig & Ziegler (2000) as well as of the ``projected deformed products of polygons'' that were announced by Ziegler (2004), a family of 4-polytopes whose ``fatness'' gets arbitrarily close to 9.
An algorithm for the classification of smooth Fano polytopes
We present an algorithm that produces the classification list of smooth Fano d-polytopes for any given d. The input of the algorithm is a single number, namely the positive integer d. The algorithm has been used to classify smooth Fano d-polytopes for d<=7. There are 7622 isomorphism classes of smooth Fano 6-polytopes and 72256 isomorphism classes of smooth Fano 7-polytopes.
Classification of terminal simplicial reflexive d-polytopes with 3d-1 vertices
We classify terminal simplicial reflexive d-polytopes with 3d-1 vertices. They turn out to be smooth Fano d-polytopes. When d is even there is 1 such polytope up to isomorphism, while there are 2 when d is uneven.