arXiv++ Combinatorics

We consider partially directed walks crossing a $L\times L$ square weighted according to their length by a fugacity $t$. The exact solution of this model is computed in three different ways, depending on whether $t$ is less than, equal to or greater than 1. In all cases a complete expression for the dominant asymptotic behaviour of the partition function is calculated. The model admits a dilute to dense phase transition, where for $0 < t < 1$ the partition function scales exponentially in $L$ whereas for $t>1$ the partition function scales exponentially in $L^2$, and when $t=1$ there is an intermediate scaling which is exponential in $L \log{L}$.

The Knot Entropy Conjecture states that the exponential growth rate of the number of $n$-edge lattice polygons with knot-type $K$ is the same as that for unknot polygons. Moreover, the next order growth follows a power law in $n$ with an exponent that increases by one for each prime knot in the knot decomposition of $K$. We provide the first proof of this conjecture by considering knots and non-split links in tube $\mathbb{T}^*$, an $\infty \times 2\times 1$ sublattice of the simple cubic lattice. We establish upper and lower bounds relating the asymptotics of the number of $n$-edge polygons with fixed link-type in $\mathbb{T}^*$ to that of the number of $n$-edge unknots. For the upper bound, we prove that polygons can be unknotted by braid insertions. For the lower bound, we prove a pattern theorem for unknots using information from exact transfer-matrices. This work provides new knot theory results for 4-plats and new combinatorics results for lattice polygons. Connections to modelling polymers such as DNA in nanochannels are highlighted.

We consider walks on the edges of the square lattice $\mathbb Z^2$ which obey \emph{two-step rules,} which allow (or forbid) steps in a given direction to be followed by steps in another direction. We classify these rules according to a number of criteria, and show how these properties affect their generating functions, asymptotic enumerations and limiting shapes, on the full lattice as well as the upper half plane. For walks in the quarter plane, we only make a few tentative first steps. We propose candidates for the group of a model, analogous to the group of a regular short-step quarter plane model, and investigate which models have finite versus infinite groups. We demonstrate that the orbit sum method used to solve a number of the original models can be made to work for some models here, producing a D-finite solution. We also generate short series for all models and guess differential or algebraic equations where possible. In doing so, we find that there are possibilities here which do not occur for the regular short-step models, including cases with algebraic or D-finite generating functions but infinite groups, as well as models with non-D-finite generating functions but finite groups.

We provide the exact solution of several variants of simple models of the zipping transition of two bound polymers, such as occurs in DNA/RNA, in two and three dimensions using pairs of directed lattice paths. In three dimensions the solutions are written in terms of complete elliptic integrals. We analyse the phase transition associated with each model giving the scaling of the partition function. We also extend the models to include a pulling force between one end of the pair of paths, which competes with the attractive monomer-monomer interactions between the polymers.

We study a model of a semiflexible long chain polymer confined to a two-dimensional slit of width $w$, and interacting with the walls of the slit. The interactions with the walls are controlled by Boltzmann weights $a$ and $b$, and the flexibility of the polymer is controlled by another Boltzmann weight $c$. This is a simple model of the steric stabilisation of colloidal dispersions by polymers in solution. We solve the model exactly and compute various quantities in $(a,b,c)$-space, including the free energy and the force exerted by the polymer on the walls of the slit. In some cases these quantities can be computed exactly for all $w$, while for others only asymptotic expressions can be found. Of particular interest is the zero-force surface -- the manifold in $(a,b,c)$-space where the free energy is independent of $w$, and the loss of entropy due to confinement in the slit is exactly balanced by the energy gained from interactions with the walls.

Lattice paths in the quarter plane have led to a large and varied set of results in recent years. One major project has been the classification of step sets according to the properties of the corresponding generating functions, and this has involved a variety of techniques, some highly intricate and specialised. The famous Kreweras and reverse Kreweras walk models are two particularly interesting models, as they are among the only four cases which have algebraic generating functions. Here we investigate how the properties of the Kreweras and reverse Kreweras models change when boundary interactions are introduced. That is, we associate three real-valued weights $a,b,c$ with visits by the walks to the $x$-axis, the $y$-axis and the origin $(0,0)$ respectively. These models were partially solved in a recent paper by Beaton, Owczarek and Rechnitzer (2019). We apply the algebraic kernel method to completely solve these two models. We find that reverse Kreweras walks have an algebraic generating function for all $a,b,c$, regardless of whether the walks are restricted to end at the origin or on one of the axes, or may end anywhere at all. For Kreweras walks, the generating function for walks returning to the origin is algebraic, but the other cases are only D-finite. To our knowledge this is the first example of a quarter-plane model with this property.

We study several related models of self-avoiding polygons in a tubular subgraph of the simple cubic lattice, with a particular interest in the asymptotics of the knotting statistics. Polygons in a tube can be characterised by a finite transfer matrix, and this allows for the derivation of pattern theorems, calculation of growth rates and exact enumeration. We also develop a static Monte Carlo method which allows us to sample polygons of a given size directly from a chosen Boltzmann distribution. Using these methods we accurately estimate the growth rates of unknotted polygons in the $2\times1\times\infty$ and $3\times1\times\infty$ tubes, and confirm that these are the same for any fixed knot-type $K$. We also confirm that the entropic exponent for unknots is the same as that of all polygons, and that the exponent for fixed knot-type $K$ depends only on the number of prime factors in the knot decomposition of $K$. For the simplest knot-types, this leads to a good approximation for the polygon size at which the probability of the given knot-type is maximized, and in some cases we are able to sample sufficiently long polygons to observe this numerically.

The first problem addressed by this article is the enumeration of some families of pattern-avoiding inversion sequences. We solve some enumerative conjectures left open by the foundational work on the topics by Corteel et al., some of these being also solved independently by Lin, and Kim and Lin. The strength of our approach is its robustness: we enumerate four families $F_1 \subset F_2 \subset F_3 \subset F_4$ of pattern-avoiding inversion sequences ordered by inclusion using the same approach. More precisely, we provide a generating tree (with associated succession rule) for each family $F_i$ which generalizes the one for the family $F_{i-1}$. The second topic of the paper is the enumeration of a fifth family $F_5$ of pattern-avoiding inversion sequences (containing $F_4$). This enumeration is also solved \emph{via} a succession rule, which however does not generalize the one for $F_4$. The associated enumeration sequence, which we call the \emph{powered Catalan numbers}, is quite intriguing, and further investigated. We provide two different succession rules for it, denoted $Ω_{pCat}$ and $Ω_{steady}$, and show that they define two types of families enumerated by powered Catalan numbers. Among such families, we introduce the \emph{steady paths}, which are naturally associated with $Ω_{steady}$. They allow us to bridge the gap between the two types of families enumerated by powered Catalan numbers: indeed, we provide a size-preserving bijection between steady paths and valley-marked Dyck paths (which are naturally associated with $Ω_{pCat}$). Along the way, we provide several nice connections to families of permutations defined by the avoidance of vincular patterns, and some enumerative conjectures.

Using a lattice model of polymers in a tube, we define one way to characterise different configurations of a given knot as either "local" or "non-local" and, for several ring polymer models, we provide both theoretical and numerical evidence that, at equilibrium, the non-local configurations are more likely than the local ones. These characterisations are based on a standard approach for measuring the "size" of a knot within a knotted polymer chain. The method involves associating knot-types to subarcs of the chain, and then identifying a knotted subarc with minimal arclength; this arclength is then the knot-size. If the resulting knot-size is small relative to the whole length of the chain, then the knot is considered to be localised or "local". If on the other hand the knot-size is comparable to the length of the chain, then the knot is considered to be "non-local". Using this definition, we establish that all but exponentially few sufficiently long self-avoiding polygons (closed chains) in a tubular sublattice of the simple cubic lattice are "non-locally" knotted. This is shown to also hold for the case when the same polygons are subject to an external tensile force, as well as in the extreme case when they are as compact as possible (no empty lattice sites). We also provide numerical evidence for small tube sizes that at equilibrium non-local knotting is more likely than local knotting, regardless of the strength of the stretching or compressing force. We note however that because of the tube confinement, the occurrence of non-local knotting in walks (open chains) is significantly different than for polygons. The relevance of these results to recent experiments involving DNA knots in solid-state nanopores is also discussed.

We study several models of staircase polygons on the $45^\circ$ rotated square lattice, which interact with an impenetrable surface while also being pushed towards or pulled away from the surface by a force. The surface interaction is governed by a fugacity $a$ and the force by a fugacity $y$. Staircase polygons are simplifications of more general self-avoiding polygons, a well-studied model of interacting ring polymers. For this simplified case we are able to exactly determine the limiting free energy in the full $a$-$y$ plane, and demonstrate that staircase polygons exhibit four different phases, including a "mixed" adsorbed-ballistic phase.

We provide a new succession rule (i.e. generating tree) associated with Schröder numbers, that interpolates between the known succession rules for Catalan and Baxter numbers. We define Schröder and Baxter generalizations of parallelogram polyominoes, called slicings, which grow according to these succession rules. In passing, we also exhibit Schröder subclasses of Baxter classes, namely a Schröder subset of triples of non-intersecting lattice paths, a new Schröder subset of Baxter permutations, and a new Schröder subset of mosaic floorplans. Finally, we define two families of subclasses of Baxter slicings: the $m$-skinny slicings and the $m$-row-restricted slicings, for $m \in \mathbb{N}$. Using functional equations and the kernel method, their generating functions are computed in some special cases, and we conjecture that they are algebraic for any $m$.

Prudent walks are self-avoiding walks which cannot step towards an already occupied vertex. We introduce a new model of adsorbing prudent walks on the square lattice, which start on an impenetrable surface and accrue a fugacity $a$ with each step along the surface. These are different to other exactly solved models of polymer adsorption, like Dyck paths, Motzkin paths and partially-directed walks, in that they are not trivially directed - they are able to step in all lattice directions. We calculate the generating functions, free energies and surface densities for this model and observe a first-order adsorption transition at the critical value of the surface interaction.

We consider the model of self-avoiding walks on the $d$-dimensional hypercubic lattice interacting with a $d^*$-dimensional defect, where $1\leq d^*<d$. Such an interaction can be attractive or repulsive, and is controlled by a Boltzmann weight $a$ associated with visits to the defect. When $d=3$ and $d^*=1$ or $2$, this can be seen as a model of long linear polymers in a good solvent, interacting with a linear filament or the interface of two liquids of different density. For all combinations of dimensions, there is a critical value $a_{\rm c}$ which separates the desorbed and adsorbed phases of the model. We prove that in all cases $a_{\rm c}=1$, confirming conjectures by a number of authors.

Self-avoiding walks are a simple and well-known model of long, flexible polymers in a good solvent. Polymers being pulled away from a surface by an external agent can be modelled with self-avoiding walks in a half-space, with a Boltzmann weight $y = e^f$ associated with the pulling force. This model is known to have a critical point at a certain value $y_c$ of this Boltzmann weight, which is the location of a transition between the so-called free and ballistic phases. The value $y_c=1$ has been conjectured by several authors using numerical estimates. We provide a relatively simple proof of this result, and show that further properties of the free energy of this system can be determined by re-interpreting existing results about the two-point function of self-avoiding walks.

In a recent paper by Beaton et al, it was proved that a model of self-avoiding walks on the honeycomb lattice, interacting with an impenetrable surface, undergoes an adsorption phase transition when the surface fugacity is $1+\sqrt{2}$. Their proof used a generalisation of an identity obtained by Duminil-Copin and Smirnov, and confirmed a conjecture of Batchelor and Yung. We consider a similar model of self-avoiding walk adsorption on the honeycomb lattice, but with the lattice rotated by $π/2$. For this model there also exists a conjecture for the critical surface fugacity, made in 1998 by Batchelor, Bennett-Wood and Owczarek. Using similar methods to Beaton et al, we prove that this is indeed the critical fugacity.

Recently Beaton, de Gier and Guttmann proved a conjecture of Batchelor and Yung that the critical fugacity of self-avoiding walks interacting with (alternate) sites on the surface of the honeycomb lattice is $1+\sqrt{2}$. A key identity used in that proof depends on the existence of a parafermionic observable for self-avoiding walks interacting with a surface on the honeycomb lattice. Despite the absence of a corresponding observable for SAW on the square and triangular lattices, we show that in the limit of large lattices, some of the consequences observed for the honeycomb lattice persist irrespective of lattice. This permits the accurate estimation of the critical fugacity for the corresponding problem for the square and triangular lattices. We consider both edge and site weighting, and results of unprecedented precision are achieved. We also \emph{prove} the corresponding result fo the edge-weighted case for the honeycomb lattice.

In 2010, Duminil-Copin and Smirnov proved a long-standing conjecture of Nienhuis, made in 1982, that the growth constant of self-avoiding walks on the hexagonal (a.k.a. honeycomb) lattice is $μ=\sqrt{2+\sqrt{2}}.$ A key identity used in that proof was later generalised by Smirnov so as to apply to a general O(n) loop model with $n\in [-2,2]$ (the case $n=0$ corresponding to SAWs). We modify this model by restricting to a half-plane and introducing a surface fugacity $y$ associated with boundary sites (also called surface sites), and obtain a generalisation of Smirnov's identity. The critical value of the surface fugacity was conjectured by Batchelor and Yung in 1995 to be $y_{\rm c}=1+2/\sqrt{2-n}.$ This value plays a crucial role in our generalized identity, just as the value of growth constant did in Smirnov's identity. For the case $n=0$, corresponding to \saws\ interacting with a surface, we prove the conjectured value of the critical surface fugacity. A crucial part of the proof involves demonstrating that the generating function of self-avoiding bridges of height $T$, taken at its critical point $1/μ$, tends to 0 as $T$ increases, as predicted from SLE theory.

Prudent walks are special self-avoiding walks that never take a step towards an already occupied site, and \emph{$k$-sided prudent walks} (with $k=1,2,3,4$) are, in essence, only allowed to grow along $k$ directions. Prudent polygons are prudent walks that return to a point adjacent to their starting point. Prudent walks and polygons have been previously enumerated by length and perimeter (Bousquet-Mélou, Schwerdtfeger; 2010). We consider the enumeration of \emph{prudent polygons} by \emph{area}. For the 3-sided variety, we find that the generating function is expressed in terms of a $q$-hypergeometric function, with an accumulation of poles towards the dominant singularity. This expression reveals an unusual asymptotic structure of the number of polygons of area $n$, where the critical exponent is the transcendental number $\log_23$ and and the amplitude involves tiny oscillations. Based on numerical data, we also expect similar phenomena to occur for 4-sided polygons. The asymptotic methodology involves an original combination of Mellin transform techniques and singularity analysis, which is of potential interest in a number of other asymptotic enumeration problems.