arXiv++ Combinatorics

In a digraph, a quasi-kernel is a subset of vertices that is independent and such that the shortest path from every vertex to this subset is of length at most two. The ``small quasi-kernel conjecture,'' proposed by Erdős and Székely in 1976, postulates that every sink-free digraph has a quasi-kernel whose size is within a fraction of the total number of vertices. The conjecture is even more precise with a $1/2$ ratio, but even with larger ratio, this property is known to hold only for few classes of graphs. The focus here is on small quasi-kernels in split graphs. This family of graphs has played a special role in the study of the conjecture since it was used to disprove a strengthening that postulated the existence of two disjoint quasi-kernels. The paper proves that every sink-free split digraph $D$ has a quasi-kernel of size at most $\frac{2}{3}|V(D)|$, and even of size at most two when the graph is an orientation of a complete split graph. It is also shown that computing a quasi-kernel of minimal size in a split digraph is W[2]-hard.

In a strongly connected graph $G = (V,E)$, a cut arc (also called strong bridge) is an arc $e \in E$ whose removal makes the graph no longer strongly connected. Equivalently, there exist $u,v \in V$, such that all $u$-$v$ walks contain $e$. Cut arcs are a fundamental graph-theoretic notion, with countless applications, especially in reachability problems. In this paper we initiate the study of cut paths, as a generalisation of cut arcs, which we naturally define as those paths $P$ for which there exist $u,v \in V$, such that all $u$-$v$ walks contain $P$ as subwalk. We first prove various properties of cut paths and define their remainder structures, which we use to present a simple $O(m)$-time verification algorithm for a cut path ($|V| = n$, $|E| = m$). Secondly, we apply cut paths and their remainder structures to improve several reachability problems from bioinformatics. A walk is called safe if it is a subwalk of every node-covering closed walk of a strongly connected graph. Multi-safety is defined analogously, by considering node-covering sets of closed walks instead. We show that cut paths provide simple $O(m)$-time algorithms verifying if a walk is safe or multi-safe. For multi-safety, we present the first linear time algorithm, while for safety, we present a simple algorithm where the state-of-the-art employed complex data structures. Finally we show that the simultaneous computation of remainder structures of all subwalks of a cut path can be performed in linear time. These properties yield an $O(mn)$ algorithm outputting all maximal multi-safe walks, improving over the state-of-the-art algorithm running in time $O(m^2+n^3)$. The results of this paper only scratch the surface in the study of cut paths, and we believe a rich structure of a graph can be revealed, considering the perspective of a path, instead of just an arc.

Among the most important variants of the traveling salesman problem (TSP) are those relaxing the constraint that every locus should necessarily get visited, rather taking into account a revenue (prize) for visiting customers. In the Profitable Tour Problem (PTP), we seek for a tour visiting a subset of customers while maximizing net gain (profit) as difference between total revenue collected from visited customers and incurred traveling costs. The metric TSP can be modeled as a PTP with large revenues. As such, PTP is well-known to be NP-hard and also APX-hardness follows. Nevertheless, PTP is solvable in polynomial time on particular graph structures like lines, trees and circles. Following recent emphasis on robust optimization, and motivated by current flourishing of retail delivery services, we study the Probabilistic Profitable Tour Problem (PPTP), the generalization of PTP where customers will show up with a known probability, in their respective loci,only after the tour has been planned. Here, the selection of customers has to be made a priori, before knowing if a customer will actually submit his request or will not. While the tour has to be designed without this knowledge, revenues will only be collected from customers who will require the service. The objective is to maximize the expected net gain obtained by visiting only the customers that show up. We provide a polynomial time algorithm computing and characterizing the space of optimal solutions for the special case of the PPTP where customers are distributed on a line.

In a digraph, a quasi-kernel is a subset of vertices that is independent and such that every vertex can reach some vertex in that set via a directed path of length at most two. Whereas Chvátal and Lovász proved in 1974 that every digraph has a quasi-kernel, very little is known so far about the complexity of finding small quasi-kernels. In 1976 Erdős and Székely conjectured that every sink-free digraph $D = (V, A)$ has a quasi-kernel of size at most $|V|/2$. Obviously, if $D$ has two disjoint quasi-kernels then it has a quasi-kernel of size at most $|V|/2$, and in 2001 Gutin, Koh, Tay and Yeo conjectured that every sink-free digraph has two disjoint quasi-kernels. Yet, they constructed in 2004 a counterexample, thereby disproving this stronger conjecture. We shall show that, not only sink-free digraphs occasionally fail to contain two disjoint quasi-kernels, but it is computationally hard to distinguish those that do from those that do not. We also prove that the problem of computing a small quasi-kernel is polynomial time solvable for orientations of trees but is computationally hard in most other cases (and in particular for restricted acyclic digraphs).

Genome assembly is a fundamental problem in Bioinformatics, requiring to reconstruct a source genome from an assembly graph built from a set of reads (short strings sequenced from the genome). A notion of genome assembly solution is that of an arc-covering walk of the graph. Since assembly graphs admit many solutions, the goal is to find what is definitely present in all solutions, or what is safe. Most practical assemblers are based on heuristics having at their core unitigs, namely paths whose internal nodes have unit in-degree and out-degree, and which are clearly safe. The long-standing open problem of finding all the safe parts of the solutions was recently solved [RECOMB 2016] yielding a 60% increase in contig length. This safe and complete genome assembly algorithm was followed by other works improving the time bounds, as well as extending the results for different notions of assembly solution. But it remained open whether one can be complete also for models of genome assembly of practical applicability. In this paper we present a universal framework for obtaining safe and complete algorithms which unify the previous results, while also allowing for easy generalisations to assembly problems including many practical aspects. This is based on a novel graph structure, called the hydrostructure of a walk, which highlights the reachability properties of the graph from the perspective of the walk. The hydrostructure allows for simple characterisations of the existing safe walks, and of their new practical versions. Almost all of our characterisations are directly adaptable to optimal verification algorithms, and simple enumeration algorithms. Most of these algorithms are also improved to optimality using an incremental computation procedure and a previous optimal algorithm of a specific model.

Genome assembly asks to reconstruct an unknown string from many shorter substrings of it. Even though it is one of the key problems in Bioinformatics, it is generally lacking major theoretical advances. Its hardness stems both from practical issues (size and errors of real data), and from the fact that problem formulations inherently admit multiple solutions. Given these, at their core, most state-of-the-art assemblers are based on finding non-branching paths (unitigs) in an assembly graph. If one defines a genome assembly solution as a closed arc-covering walk of the graph, then unitigs appear in all solutions, being thus safe partial solutions. All all such safe walks were recently characterized as omnitigs, leading to the first safe and complete genome assembly algorithm. Even if omnitig finding was improved to quadratic time, it remained open whether the crucial linear-time feature of finding unitigs can be attained with omnitigs. We describe a surprising $O(m)$-time algorithm to identify all maximal omnitigs of a graph with $n$ nodes and $m$ arcs, notwithstanding the existence of families of graphs with $Θ(mn)$ total maximal omnitig size. This is based on the discovery of a family of walks (macrotigs) with the property that all the non-trivial omnitigs are univocal extensions of subwalks of a macrotig, with two consequences: (1) A linear-time output-sensitive algorithm enumerating all maximal omnitigs. (2) A compact $O(m)$ representation of all maximal omnitigs, which allows, e.g., for $O(m)$-time computation of various statistics on them. Our results close a long-standing theoretical question inspired by practical genome assemblers, originating with the use of unitigs in 1995. We envision our results to be at the core of a reverse transfer from theory to practical and complete genome assembly programs, as has been the case for other key Bioinformatics problems.

Motivated by applications in cancer genomics and following the work of Hajirasouliha and Raphael (WABI 2014), Hujdurović et al. (IEEE TCBB, to appear) introduced the minimum conflict-free row split (MCRS) problem: split each row of a given binary matrix into a bitwise OR of a set of rows so that the resulting matrix corresponds to a perfect phylogeny and has the minimum possible number of rows among all matrices with this property. Hajirasouliha and Raphael also proposed the study of a similar problem, in which the task is to minimize the number of distinct rows of the resulting matrix. Hujdurović et al. proved that both problems are NP-hard, gave a related characterization of transitively orientable graphs, and proposed a polynomial-time heuristic algorithm for the MCRS problem based on coloring cocomparability graphs. We give new, more transparent formulations of the two problems, showing that the problems are equivalent to two optimization problems on branchings in a derived directed acyclic graph. Building on these formulations, we obtain new results on the two problems, including: (i) a strengthening of the heuristic by Hujdurović et al. via a new min-max result in digraphs generalizing Dilworth's theorem, which may be of independent interest, (ii) APX-hardness results for both problems, (iii) approximation algorithms, and (iv) exponential-time algorithms solving the two problems to optimality faster than the naïve brute-force approach. Our work relates to several well studied notions in combinatorial optimization: chain partitions in partially ordered sets, laminar hypergraphs, and (classical and weighted) colorings of graphs.

Let $S=\{K_{1,3},K_3,P_4\}$ be the set of connected graphs of size 3. We study the problem of partitioning the edge set of a graph $G$ into graphs taken from any non-empty $S'\subseteq S$. The problem is known to be NP-complete for any possible choice of $S'$ in general graphs. In this paper, we assume that the input graph is cubic, and study the computational complexity of the problem of partitioning its edge set for any choice of $S'$. We identify all polynomial and NP-complete problems in that setting, and give graph-theoretic characterisations of $S'$-decomposable cubic graphs in some cases.

Given permutations $σ\in S_k$ and $π\in S_n$ with $k<n$, the \emph{pattern matching} problem is to decide whether $π$ matches $σ$ as an order-isomorphic subsequence. We give a linear-time algorithm in case both $π$ and $σ$ avoid the two size-$3$ permutations $213$ and $231$. For the special case where only $σ$ avoids $213$ and $231$, we present a $O(max(kn^2,n^2\log(\log(n)))$ time algorithm. We extend our research to bivincular patterns that avoid $213$ and $231$ and present a $O(kn^4)$ time algorithm. Finally we look at the related problem of the longest subsequence which avoids $213$ and $231$.

We study a relaxation of the Vector Domination problem called Vector Connectivity (VecCon). Given a graph $G$ with a requirement $r(v)$ for each vertex $v$, VecCon asks for a minimum cardinality set $S$ of vertices such that every vertex $v\in V\setminus S$ is connected to $S$ via $r(v)$ disjoint paths. In the paper introducing the problem, Boros et al. [Networks, 2014] gave polynomial-time solutions for VecCon in trees, cographs, and split graphs, and showed that the problem can be approximated in polynomial time on $n$-vertex graphs to within a factor of $\log n+2$, leaving open the question of whether the problem is NP-hard on general graphs. We show that VecCon is APX-hard in general graphs, and NP-hard in planar bipartite graphs and in planar line graphs. We also generalize the polynomial result for trees by solving the problem for block graphs.

Given a combinatorial decomposition for a counting problem, we resort to the simple scheme of approximating large numbers by floating-point representations in order to obtain efficient Fully Polynomial Time Approximation Schemes (FPTASes) for it. The number of bits employed for the exponent and the mantissa will depend on the error parameter $0 < \varepsilon \leq 1$ and on the characteristics of the problem. Accordingly, we propose the first FPTASes with $1 \pm \varepsilon$ relative error for counting and generating uniformly at random a labeled DAG with a given number of vertices. This is accomplished starting from a classical recurrence for counting DAGs, whose values we approximate by floating-point numbers. After extending these results to other families of DAGs, we show how the same approach works also with problems where we are given a compact representation of a combinatorial ensemble and we are asked to count and sample elements from it. We employ here the floating-point approximation method to transform the classic pseudo-polynomial algorithm for counting 0/1 Knapsack solutions into a very simple FPTAS with $1 - \varepsilon$ relative error. Its complexity improves upon the recent result (Štefankovič et al., SIAM J. Comput., 2012), and, when $\varepsilon^{-1} = Ω(n)$, also upon the best-known randomized algorithm (Dyer, STOC, 2003). To show the versatility of this technique, we also apply it to a recent generalization of the problem of counting 0/1 Knapsack solutions in an arc-weighted DAG, obtaining a faster and simpler FPTAS than the existing one.