arXiv++ Combinatorics

Given an origami crease pattern $C=(V,E)$, a straight-line planar graph embedded in a region of $\mathbb{R}^2$, we assign each crease to be either a mountain crease (which bends convexly) or a valley crease (which bends concavely), creating a mountain-valley (MV) assignment $μ:E\to\{-1,1\}$. An MV assignment $μ$ is locally valid if the faces around each vertex in $C$ can be folded flat under $μ$. In this paper, we investigate locally valid MV assignments of the Miura-ori, $M_{m,n}$, an $m\times n$ parallelogram tessellation used in numerous engineering applications. The origami flip graph $OFG(C)$ of $C$ is a graph whose vertices are locally valid MV assignments of $C$, and two vertices are adjacent if they differ by a face flip, an operation that swaps the MV-parity of every crease bordering a given face of $C$. We enumerate the number of vertices and edges in $OFG(M_{2,n})$ and prove several facts about the degrees of vertices in $OFG(M_{2,n})$. By finding recurrence relations, we show that the number of vertices of degree $d$ and $2n-a$ (for $0\leq a$) are both described by polynomials of particular degrees. We then prove that the diameter of $OFG(M_{2,n})$ is $\lceil \frac{n^2}{2}\rceil$ using techniques from 3-coloring reconfiguration graphs.

A strip of square stamps can be folded in many ways such that all of the stamps are stacked in a single pile in the folded state. The stamp folding problem asks for the number of such foldings and has previously been studied extensively. We consider this problem with the additional restriction of fixing the mountain-valley assignment of each crease in the stamp pattern. We provide a closed form for counting the number of legal foldings on specific patterns of mountain-valley assignments, including a surprising appearance of the Catalan numbers. We describe results on upper and lower bounds for the number of ways to fold a given mountain-valley assignment on the strip of stamps, provide experimental evidence suggesting more general results, and include conjectures and open problems.

We develop a theory of random flat-foldable origami. Given a crease pattern, we consider a uniformly random assignment of mountain and valley creases, conditioned on the assignment being flat-foldable at each vertex. A natural method to approximately sample from this distribution is via the face-flip Markov chain where one selects a face of the crease pattern uniformly at random and, if possible, flips all edges of that face from mountain to valley and vice-versa. We prove that this chain mixes rapidly for several natural families of origami tessellations -- the square twist, the square grid, and the Miura-ori -- as well as for the single-vertex crease pattern. We also compare local to global flat-foldability and show that on the square grid, a random locally flat-foldable configuration is exponentially unlikely to be globally flat-foldable.

"Flat origami" refers to the folding of flat, zero-curvature paper such that the finished object lies in a plane. Mathematically, flat origami consists of a continuous, piecewise isometric map $f:P\subseteq\mathbb{R}^2\to\mathbb{R}^2$ along with a layer ordering $λ_f:P\times P\to \{-1,1\}$ that tracks which points of $P$ are above/below others when folded. The set of crease lines that a flat origami makes (i.e., the set on which the mapping $f$ is non-differentiable) is called its "crease pattern." Flat origami mappings and their layer orderings can possess surprisingly intricate structure. For instance, determining whether or not a given straight-line planar graph drawn on $P$ is the crease pattern for some flat origami has been shown to be an NP-complete problem, and this result from 1996 led to numerous explorations in computational aspects of flat origami. In this paper we prove that flat origami, when viewed as a computational device, is Turing complete, or more specifically P-complete. We do this by showing that flat origami crease patterns with "optional creases" (creases that might be folded or remain unfolded depending on constraints imposed by other creases or inputs) can be constructed to simulate Rule 110, a one-dimensional cellular automaton that was proven to be Turing complete by Matthew Cook in 2004.

Flat origami studies straight line, planar graphs $C=(V,E)$ drawn on a region $R\subset\mathbb{R}^2$ that can act as crease patterns to map, or fold, $R$ into $\mathbb{R}^2$ in a way that is continuous and a piecewise isometry exactly on the faces of $C$. Associated with such crease pattern graphs are valid mountain-valley (MV) assignments $μ:E\to\{-1,1\}$, indicating which creases can be mountains (convex) or valleys (concave) to allow $R$ to physically fold flat without self-intersecting. In this paper, we initiate the first study of how valid MV assignments of single-vertex crease patterns are related to one another via face-flips, a concept that emerged from applications of origami in engineering and physics, where flipping a face $F$ means switching the MV parity of all creases of $C$ that border $F$. Specifically, we study the origami flip graph ${\rm{OFG}}(C)$, whose vertices are all valid MV assignments of $C$ and edges connect assignments that differ by only one face flip. We prove that, for the single-vertex crease pattern $A_{2n}$ whose $2n$ sector angles around the vertex are all equal, ${\rm{OFG}}(A_{2n})$ contains as subgraphs all other origami flip graphs of degree-$2n$ flat origami vertex crease patterns. We also prove that ${\rm{OFG}}(A_{2n})$ is connected and has diameter $n$ by providing two $O(n^2)$ algorithms to traverse between vertices in the graph, and we enumerate the vertices, edges, and degree sequence of ${\rm{OFG}}(A_{2n})$. We conclude with open questions on the surprising complexity found in origami flip graphs of this type.

Given a flat-foldable origami crease pattern $G=(V,E)$ (a straight-line drawing of a planar graph on a region of the plane) with a mountain-valley (MV) assignment $μ:E\to\{-1,1\}$ indicating which creases in $E$ bend convexly (mountain) or concavely (valley), we may \emph{flip} a face $F$ of $G$ to create a new MV assignment $μ_F$ which equals $μ$ except for all creases $e$ bordering $F$, where we have $μ_F(e)=-μ(e)$. In this paper we explore the configuration space of face flips for a variety of crease patterns $G$ that are tilings of the plane, proving examples where $μ_F$ results in a MV assignment that is either never, sometimes, or always flat-foldable for various choices of $F$. We also consider the problem of finding, given two foldable MV assignments $μ_1$ and $μ_2$ of a given crease pattern $G$, a minimal sequence of face flips to turn $μ_1$ into $μ_2$. We find polynomial-time algorithms for this in the cases where $G$ is either a square grid or the Miura-ori, and show that this problem is NP-hard in the case where $G$ is the triangle lattice.

Origami, where two-dimensional sheets are folded into complex structures, is proving to be rich with combinatorial and geometric structure, most of which remains to be fully understood. In this paper we consider \emph{flat origami}, where the sheet of material is folded into a two-dimensional object, and consider the mountain (convex) and valley (concave) creases made by such foldings, called a \emph{MV assignment} of the crease pattern. We establish a method to, given a flat-foldable crease pattern $C$ under certain conditions, create a planar graph $C^*$ whose 3-colorings are in one-to-one correspondence with the locally-valid MV assignments of $C$. This reduces the general, unsolved problem of enumerating locally-valid MV assignments to the enumeration of 3-colorings of graphs.

Define the augmented square twist origami crease pattern to be the classic square twist crease pattern with one crease added along a diagonal of the twisted square. In this paper we fully describe the rigid foldability of this new crease pattern. Specifically, the extra crease allows the square twist to rigidly fold in ways the original cannot. We prove that there are exactly four non-degenerate rigid foldings of this crease pattern from the unfolded state.

In this paper, we will show methods to interpret some rigid origami with higher degree vertices as the limit case of structures with degree-4 supplementary angle vertices. The interpretation is based on separating each crease into two parallel creases, or \emph{double lines}, connected by additional structures at the vertex. We show that double-lined versions of degree-4 flat-foldable vertices possess a rigid folding motion, as do symmetric degree-$2n$ vertices. The latter gives us a symbolic analysis of the original vertex, showing that the tangent of the quarter fold angles are proportional to each other. The double line method is also a potentially useful in giving thickness to rigid origami mechanisms. By making single crease into two creases, the fold angles can be distributed to avoid $180^\circ$ folds, when panels can easily collide with each other. This can be understood as an extension of the crease offset method of thick rigid origami with an additional guarantee of rigid-foldability.

This paper addresses the problem of finding minimum forcing sets in origami. The origami material folds flat along straight lines called creases that can be labeled as mountains or valleys. A forcing set is a subset of creases that force all the other creases to fold according to their labels. The result is a flat folding of the origami material. In this paper we develop a linear time algorithm that finds minimum forcing sets in one dimensional origami.

We survey more recent attempts at enumerating the number of mountain-valley assignments that allow a given crease pattern to locally fold flat. In particular, we solve this problem for square twist tessellations and generalize the method used to a broader family of crease patterns. We also describe the more difficult case of the Miura-ori and a recently-discovered bijection with 3-vertex colorings of grid graphs.

Polypolyhedra (after R. Lang) are compounds of edge-transitive 1-skeleta. There are 54 topologically different polypolyhedra, and each has icosidodecahedral, cuboctahedral, or tetrahedral symmetry, all are realizable as modular origami models with one module per skeleton edge. Consider a coloring in which each edge of a given component receives a different color, and where the coloring (up to global color permutation) is invariant under the polypolyhedron's symmetry group. On the Five Intersecting Tetrahedra, the edges of each color form visual bands on the model, and correspond to matchings on the dodecahedron graph. We count the number of such colorings and give three proofs. For each of the non-polygon-component polypolyhedra, there is a corresponding matching coloring, and we count the number of these matching colorings. For some of the non-polygon-component polypolyhedra, there is a corresponding visual-band coloring, and we count the number of these band colorings.

We develop an intrinsic necessary and sufficient condition for single-vertex origami crease patterns to be able to fold rigidly. We classify such patterns in the case where the creases are pre-assigned to be mountains and valleys as well as in the unassigned case. We also illustrate the utility of this result by applying it to the new concept of minimal forcing sets for rigid origami models, which are the smallest collection of creases that, when folded, will force all the other creases to fold in a prescribed way.

We develop a combinatorial model of paperfolding for the purposes of enumeration. A planar embedding of a graph is called a {\em crease pattern} if it represents the crease lines needed to fold a piece of paper into something. A {\em flat fold} is a crease pattern which lies flat when folded, i.e. can be pressed in a book without crumpling. Given a crease pattern $C=(V,E)$, a {\em mountain-valley (MV) assignment} is a function $f:E\rightarrow \{$M,V$\}$ which indicates which crease lines are convex and which are concave, respectively. A MV assignment is {\em valid} if it doesn't force the paper to self-intersect when folded. We examine the problem of counting the number of valid MV assignments for a given crease pattern. In particular we develop recursive functions that count the number of valid MV assignments for {\em flat vertex folds}, crease patterns with only one vertex in the interior of the paper. We also provide examples, especially those of Justin, that illustrate the difficulty of the general multivertex case.

We survey results on the foldability of flat origami models. The main topics are the question of when a given crease pattern can fold flat, the combinatorics of mountain and valley creases, and counting how many ways a given crease pattern can be folded. In particular, we explore generalizations of Maekawa's and Kawasaki's Theorems, develop a necessary and sufficient condition for a given assignment of mountains and valleys to fold up in a special case of single vertex folds, and describe recursive formulas to enumerate the number of ways that single vertex in a crease pattern can be folded.