arXiv++ Combinatorics

A weak $c$-colouring of a design is an assignment of colours to its points from a set of $c$ available colours, such that there are no monochromatic blocks. A colouring of a design is block-equitable, if for each block, the number of points coloured with any available pair of colours differ by at most one. Weak and block-equitable colourings of balanced incomplete block designs have been previously considered. In this paper, we extend these concepts to group divisible designs (GDDs) and packing designs. We first determine when a $k$-GDD of type $g^u$ can have a block-equitable $c$-colouring. We then give a direct construction of maximum block-equitable $2$-colourable packings with block size $4$; a recursive construction has previously appeared in the literature. We also generalise a bound given in the literature for the maximum size of block-equitably $2$-colourable packings to $c>2$. Furthermore, we establish the asymptotic existence of uniform $k$-GDDs with arbitrarily many groups and arbitrary chromatic numbers (with the exception of $c=2$ and $k=3$). A structural analysis of $2$- and $3$-uniform $3$-GDDs obtained from 4-chromatic STS$(v)$ where $v\in\{21,25,27,33,37,39\}$ is given. We briefly discuss weak colourings of packings, and finish by considering some further constraints on weak colourings of GDDs, namely requiring all groups to be either monochromatic or equitably coloured.

A square integer relative Heffter array is an $n \times n$ array whose rows and columns sum to zero, each row and each column has exactly $k$ entries and either $x$ or $-x$ appears in the array for every $x \in \mathbb{Z}_{2nk+t}\setminus J$, where $J$ is a subgroup of size $t$. There are many open problems regarding the existence of these arrays. In this paper we construct two new infinite families of these arrays with the additional property that they are strippable. These constructions complete the existence theory for square integer relative Heffter arrays in the case where $k=3$ and $n$ is prime.

The use of graph centrality measures applied to biological networks, such as protein interaction networks, underpins much research into identifying key players within biological processes. This approach however is restricted to dyadic interactions and it is well-known that in many instances interactions are polyadic. In this study we illustrate the merit of using hypergraph centrality applied to a hypernetwork as an alternative. Specifically, we review and propose an extension to a recently introduced node and edge nonlinear hypergraph centrality model which provides mutually dependent node and edge centralities. A Saccharomyces Cerevisiae protein complex hypernetwork is used as an example application with nodes representing proteins and hyperedges representing protein complexes. The resulting rankings of the nodes and edges are considered to see if they provide insight into the essentiality of the proteins and complexes. We find that certain variations of the model predict essentiality more accurately and that the degree-based variation illustrates that the centrality-lethality rule extends to a hypergraph setting. In particular, through exploitation of the models flexibility, we identify small sets of proteins densely populated with essential proteins. One of the key advantages of applying this model to a protein complex hypernetwork is that it also provides a classification method for protein complexes, unlike previous approaches which are only concerned with classifying proteins.

This paper introduces a novel hypergraph classification algorithm. The use of hypergraphs in this framework has been widely studied. In previous work, hypergraph models are typically constructed using distance or attribute based methods. That is, hyperedges are generated by connecting a set of samples which are within a certain distance or have a common attribute. These methods however, do not often focus on multi-way interactions directly. The algorithm provided in this paper looks to address this problem by constructing hypergraphs which explore multi-way interactions of any order. We also increase the performance and robustness of the algorithm by using a population of hypergraphs. The algorithm is evaluated on two datasets, demonstrating promising performance compared to a generic random forest classification algorithm.

For an integer partition $h_1 + \dots + h_n = N$, a 2-realization of this partition is a latin square of order $N$ with disjoint subsquares of orders $h_1,\dots,h_n$. The existence of 2-realizations is a partially solved problem posed by Fuchs. In this paper, we extend Fuchs' problem to $m$-ary quasigroups, or, equivalently, latin hypercubes. We construct latin cubes for some partitions with at most two distinct parts and highlight how the new problem is related to the original.

We give a framework for generalizing LDPC code constructions that use Transversal Designs or related structures such as mutually orthogonal Latin squares. Our construction offers a broader range of code lengths and codes rates. Similar earlier constructions rely on the existence of finite fields of order a power of a prime. In contrast the LDPC codes constructed here are based on difference matrices and difference covering arrays, structures available for any order $a$. They satisfy the RC constraint and have, for $a$ odd, length $a^2$ and rate $1-\frac{4a-3}{a^2}$, and for $a$ even, length $a^2-a$ and rate at least $1-\frac{4a-6}{a^2-a}$. When $3$ does not divide $a$, these LDPC codes have stopping distance at least $8$. When $a$ is odd and both $3$ and $5$ do not divide $a$, our construction delivers an infinite family of QC-LDPC codes with minimum distance at least $10$. The simplicity of the construction allows us to theoretically verify these properties and analytically determine lower bounds for the minimum distance and stopping distance of the code. The BER and FER performance of our codes over AWGN (via simulation) is at the least equivalent to codes constructed previously, while in some cases significantly outperforming them.

A Heffter array $H(n;k)$ is an $n\times n$ matrix such that each row and column contains $k$ filled cells, each row and column sum is divisible by $2nk+1$ and either $x$ or $-x$ appears in the array for each integer $1\leq x\leq nk$. Heffter arrays are useful for embedding the graph $K_{2nk+1}$ on an orientable surface. An integer Heffter array is one in which each row and column sum is $0$. Necessary and sufficient conditions (on $n$ and $k$) for the existence of an integer Heffter array $H(n;k)$ were verified by Archdeacon, Dinitz, Donovan and Yazıcı\ (2015) and Dinitz and Wanless (2017). In this paper we consider square Heffter arrays that are not necessarily integer. We show that such Heffter arrays exist whenever $3\leq k<n$.

For $v\equiv 1$ or 3 (mod 6), maximum partial triple systems on $v$ points are Steiner triple systems, STS($v$)s. The 80 non-isomorphic STS(15)s were first enumerated around 100 years ago, but the next case for Steiner triple systems was unresolved until around 2004 when it was established that there are precisely 11084874829 non-isomorphic STS(19)s. In this paper we complete enumeration of non-isomorphic maximum partial triple systems for $v\le 19$. It is shown that there are 35810097 systems on 17 points and 47744568 on 16 points. We also establish that there are precisely 157151 non-isomorphic pairwise balanced designs, PBD($17,\{3,5\}$)s, having a single block of size 5. Structural properties of these systems are determined, including their automorphism groups, and the numbers of Pasch configurations, mitres and Fano planes contained in them. The systems themselves are available from the authors.

Sliced Sudoku-based space-filling designs and, more generally, quasi-sliced orthogonal array-based space-filling designs are useful experimental designs in several contexts, including computer experiments with categorical in addition to quantitative inputs and cross-validation. Here, we provide a straightforward construction of doubly orthogonal quasi-Sudoku Latin squares which can be used to generate sliced space-filling designs which achieve uniformity in one and two-dimensional projections for both the full design and each slice. A construction of quasi-sliced orthogonal arrays based on these constructed doubly orthogonal quasi-Sudoku Latin squares is also provided and can, in turn, be used to generate sliced space-filling designs which achieve uniformity in one and two-dimensional projections for the full design and and uniformity in two-dimensional projections for each slice. These constructions are very practical to implement and yield a spectrum of design sizes and numbers of factors not currently broadly available.

Two Latin squares $L=[l(i,j)]$ and $M=[m(i,j)]$, of even order $n$ with entries $\{0,1,2,\ldots,n-1\}$, are said to be nearly orthogonal if the superimposition of $L$ on $M$ yields an $n\times n$ array $A=[(l(i,j),m(i,j))]$ in which each ordered pair $(x,y)$, $0\leq x,y\leq n-1$ and $x\neq y$, occurs at least once and the ordered pair $(x,x+n/2)$ occurs exactly twice. In this paper, we present direct constructions for the existence of general families of three cyclic mutually orthogonal Latin squares of orders $48k+14$, $48k+22$, $48k+38$ and $48k+46$. The techniques employed are based on the principle of Methods of Differences and so we also establish infinite classes of "quasi-difference" sets for these orders.

A {\sf $μ$-way Latin trade} of volume $s$ is a collection of $μ$ partial Latin squares $T_1,T_2,...,T_μ$, containing exactly the same $s$ filled cells, such that if cell $(i, j)$ is filled, it contains a different entry in each of the $μ$ partial Latin squares, and such that row $i$ in each of the $μ$ partial Latin squares contains, set-wise, the same symbols and column $j$, likewise. %If $μ=2$, $(T_1,T_2)$ is called a {\sf Latin bitrade}. It is called {\sf $μ$-way $k$-homogeneous Latin trade}, if in each row and each column $T_r$, for $1\le r\le μ,$ contains exactly $k$ elements, and each element appears in $T_r$ exactly $k$ times. It is also denoted by $(μ,k,m)$ Latin trade,where $m$ is the size of partial Latin squares. We introduce some general constructions for $μ$-way $k$-homogeneous Latin trades and specifically show that for all $k \le m$, $6\le k \le 13$ and k=15, and for all $k \le m$, $k = 4, \ 5$ (except for four specific values), a 3-way $k$-homogeneous Latin trade of volume $km$ exists. We also show that there are no (3,4,6) Latin trade and (3,4,7) Latin trade. Finally we present general results on the existence of 3-way $k$-homogeneous Latin trades for some modulo classes of $m$.

In 1980 Alltop produced a family of cubic phase sequences that nearly meet the Welch bound for maximum non-peak correlation magnitude. This family of sequences were shown by Wooters and Fields to be useful for quantum state tomography. Alltop's construction used a function that is not planar, but whose difference function is planar. In this paper we show that Alltop type functions cannot exist in fields of characteristic 3 and that for a known class of planar functions, $x^3$ is the only Alltop type function.