arXiv++ Combinatorics

A drawing of a graph is {\em $x$-monotone} if every vertical line intersects each edge of the graph at most once. We present an $O(n^5)$ time algorithm for deciding whether a simple drawing of the complete graph $K_n$ is weakly isomorphic to an $x$-monotone drawing. We note that this algorithm can also decide whether a drawing of $K_n$ is strongly isomorphic to an $x$-monotone drawing.

We study the problem of reconfiguring odd matchings, that is, matchings that cover all but a single vertex. Our reconfiguration operation is a so-called flip where the unmatched vertex of the first matching gets matched, while consequently another vertex becomes unmatched. We consider two distinct settings: the geometric setting, in which the vertices are points embedded in the plane and all occurring odd matchings are crossing-free, and a combinatorial setting, in which we consider odd matchings in general graphs. For the latter setting, we provide a complete polynomial time checkable characterization of graphs in which any two odd matchings can be reconfigured into each another. This complements the previously known result that the flip graph is always connected in the geometric setting [Aichholzer, Brötzner, Perz, and Schnider. Flips in odd matchings]. In the combinatorial setting, we prove that the diameter of the flip graph, if connected, is linear in the number of vertices. Furthermore, we establish that deciding whether there exists a flip sequence of length $k$ transforming one given matching into another is NP-complete in both the combinatorial and the geometric settings. To prove the latter, we introduce a framework that allows us to transform partial order types into general position with only polynomial overhead. Finally, we demonstrate that when parameterized by the flip distance $k$, the problem is fixed-parameter tractable (FPT) in the geometric setting when restricted to convex point sets.

In a simple drawing of a graph, any two edges intersect in at most one point (either a common endpoint or a proper crossing). A simple drawing is generalized twisted if it fulfills certain rather specific constraints on how the edges are drawn. An abstract rotation system of a graph assigns to each vertex a cyclic order of its incident edges. A realizable rotation system is one that admits a simple drawing such that at each vertex, the edges emanate in that cyclic order, and a generalized twisted rotation system can be realized as a generalized twisted drawing. Generalized twisted drawings have initially been introduced to obtain improved bounds on the size of plane substructures in any simple drawing of $K_n$. They have since gained independent interest due to their surprising properties. However, the definition of generalized twisted drawings is very geometric and drawing-specific. In this paper, we develop characterizations of generalized twisted drawings that enable a purely combinatorial view on these drawings and lead to efficient recognition algorithms. Concretely, we show that for any $n \geq 7$, an abstract rotation system of $K_n$ is generalized twisted if and only if all subrotation systems induced by five vertices are generalized twisted. This implies a drawing-independent and concise characterization of generalized twistedness. Besides, the result yields a simple $O(n^5)$-time algorithm to decide whether an abstract rotation system is generalized twisted and sheds new light on the structural features of simple drawings. We further develop a characterization via the rotations of a pair of vertices in a drawing, which we then use to derive an $O(n^2)$-time algorithm to decide whether a realizable rotation system is generalized twisted.

A flip in a plane spanning tree $T$ is the operation of removing one edge from $T$ and adding another edge such that the resulting structure is again a plane spanning tree. For trees on a set of points in convex position we study two classic types of constrained flips: (1)~Compatible flips are flips in which the removed and inserted edge do not cross each other. We relevantly improve the previous upper bound of $2n-O(\sqrt{n})$ on the diameter of the compatible flip graph to~$\frac{5n}{3}-O(1)$, by this matching the upper bound for unrestricted flips by Bjerkevik, Kleist, Ueckerdt, and Vogtenhuber [SODA~2025] up to an additive constant of $1$. We further show that no shortest compatible flip sequence removes an edge that is already in its target position. Using this so-called happy edge property, we derive a fixed-parameter tractable algorithm to compute the shortest compatible flip sequence between two given trees. (2)~Rotations are flips in which the removed and inserted edge share a common vertex. Besides showing that the happy edge property does not hold for rotations, we improve the previous upper bound of $2n-O(1)$ for the diameter of the rotation graph to~$\frac{7n}{4}-O(1)$.

Generalizing pseudospherical drawings, we introduce a new class of simple drawings, which we call separable drawings. In a separable drawing, every edge can be closed to a simple curve that intersects each other edge at most once. Curves of different edges might interact arbitrarily. Most notably, we show that (1) every separable drawing of any graph on $n$ vertices in the plane can be extended to a simple drawing of the complete graph $K_{n}$, (2) every separable drawing of $K_{n}$ contains a crossing-free Hamiltonian cycle and is plane Hamiltonian connected, and (3) every generalized convex drawing and every 2-page book drawing is separable. Further, the class of separable drawings is a proper superclass of the union of generalized convex and 2-page book drawings. Hence, our results on plane Hamiltonicity extend recent work on generalized convex drawings by Bergold et al. (SoCG 2024).

Let $\mathcal{P}$ be a set of $n=2m+1$ points in the plane in general position. We define the graph $GM_\mathcal{P}$ whose vertex set is the set of all plane matchings on $\mathcal{P}$ with exactly $m$ edges. Two vertices in $GM_\mathcal{P}$ are connected if the two corresponding matchings have $m-1$ edges in common. In this work we show that $GM_\mathcal{P}$ is connected and give an upper bound of $O(n^2)$ on its diameter. Moreover, we present a tight bound of $Θ(n)$ for the diameter of the flip graph of points in convex position.

We show that each set of $n\ge 2$ points in the plane in general position has a straight-line matching with at least $(5n+1)/27$ edges whose segments form a connected set, and such a matching can be computed in $O(n \log n)$ time. As an upper bound, we show that for some planar point sets in general position the largest matching whose segments form a connected set has $\lceil \frac{n-1}{3}\rceil$ edges. We also consider a colored version, where each edge of the matching should connect points with different colors.

Which polyominoes can be folded into a cube, using only creases along edges of the square lattice underlying the polyomino, with fold angles of $\pm 90^\circ$ and $\pm 180^\circ$, and allowing faces of the cube to be covered multiple times? Prior results studied tree-shaped polyominoes and polyominoes with holes and gave partial classifications for these cases. We show that there is an algorithm deciding whether a given polyomino can be folded into a cube. This algorithm essentially amounts to trying all possible ways of mapping faces of the polyomino to faces of the cube, but (perhaps surprisingly) checking whether such a mapping corresponds to a valid folding is equivalent to the unlink recognition problem from topology. We also give further results on classes of polyominoes which can or cannot be folded into cubes. Our results include (1) a full characterisation of all tree-shaped polyominoes that can be folded into the cube (2) that any rectangular polyomino which contains only one simple hole (out of five different types) does not fold into a cube, (3) a complete characterisation when a rectangular polyomino with two or more unit square holes (but no other holes) can be folded into a cube, and (4) a sufficient condition when a simply-connected polyomino can be folded to a cube. These results answer several open problems of previous work and close the cases of tree-shaped polyominoes and rectangular polyominoes with just one simple hole.

We consider bichromatic point sets with $n$ red and $n$ blue points and study straight-line bichromatic perfect matchings on them. We show that every such point set in convex position admits a matching with at least $\frac{3n^2}{8}-\frac{n}{2}+c$ crossings, for some $ -\frac{1}{2} \leq c \leq \frac{1}{8}$. This bound is tight since for any $k> \frac{3n^2}{8} -\frac{n}{2}+\frac{1}{8}$ there exist bichromatic point sets that do not admit any perfect matching with $k$ crossings.

It is a longstanding conjecture that every simple drawing of a complete graph on $n \geq 3$ vertices contains a crossing-free Hamiltonian cycle. We strengthen this conjecture to "there exists a crossing-free Hamiltonian path between each pair of vertices" and show that this stronger conjecture holds for several classes of simple drawings, including strongly c-monotone drawings and cylindrical drawings. As a second main contribution, we give an overview on different classes of simple drawings and investigate inclusion relations between them up to weak isomorphism.

Simple drawings are drawings of graphs in which two edges have at most one common point (either a common endpoint, or a proper crossing). It has been an open question whether every simple drawing of a complete bipartite graph $K_{m,n}$ contains a plane spanning tree as a subdrawing. We answer this question to the positive by showing that for every simple drawing of $K_{m,n}$ and for every vertex $v$ in that drawing, the drawing contains a shooting star rooted at $v$, that is, a plane spanning tree containing all edges incident to $v$.

For a simple drawing $D$ of the complete graph $K_n$, two (plane) subdrawings are compatible if their union is plane. Let $\mathcal{T}_D$ be the set of all plane spanning trees on $D$ and $\mathcal{F}(\mathcal{T}_D)$ be the compatibility graph that has a vertex for each element in $\mathcal{T}_D$ and two vertices are adjacent if and only if the corresponding trees are compatible. We show, on the one hand, that $\mathcal{F}(\mathcal{T}_D)$ is connected if $D$ is a cylindrical, monotone, or strongly c-monotone drawing. On the other hand, we show that the subgraph of $\mathcal{F}(\mathcal{T}_D)$ induced by stars, double stars, and twin stars is also connected. In all cases the diameter of the corresponding compatibility graph is at most linear in $n$.

We consider a minimizing variant of the well-known \emph{No-Three-In-Line Problem}, the \emph{Geometric Dominating Set Problem}: What is the smallest number of points in an $n\times n$~grid such that every grid point lies on a common line with two of the points in the set? We show a lower bound of $Ω(n^{2/3})$ points and provide a constructive upper bound of size $2 \lceil n/2 \rceil$. If the points of the dominating sets are required to be in general position we provide optimal solutions for grids of size up to $12 \times 12$. For arbitrary $n$ the currently best upper bound for points in general position remains the obvious $2n$. Finally, we discuss the problem on the discrete torus where we prove an upper bound of $O((n \log n)^{1/2})$. For $n$ even or a multiple of 3, we can even show a constant upper bound of 4. We also mention a number of open questions and some further variations of the problem.

Recently, the second and third author showed that complete geometric graphs on $2n$ vertices in general cannot be partitioned into $n$ plane spanning trees. Building up on this work, in this paper, we initiate the study of partitioning into beyond planar subgraphs, namely into $k$-planar and $k$-quasi-planar subgraphs and obtain first bounds on the number of subgraphs required in this setting.

A $k$-crossing family in a point set $S$ in general position is a set of $k$ segments spanned by points of $S$ such that all $k$ segments mutually cross. In this short note we present two statements on crossing families which are based on sets of small cardinality: (1) Any set of at least 15 points contains a crossing family of size 4. (2) There are sets of $n$ points which do not contain a crossing family of size larger than $8\lceil \frac{n}{41} \rceil$. Both results improve the previously best known bounds.

We study the problem of embedding graphs in the plane as good geometric spanners. That is, for a graph $G$, the goal is to construct a straight-line drawing $Γ$ of $G$ in the plane such that, for any two vertices $u$ and $v$ of $G$, the ratio between the minimum length of any path from $u$ to $v$ and the Euclidean distance between $u$ and $v$ is small. The maximum such ratio, over all pairs of vertices of $G$, is the spanning ratio of $Γ$. First, we show that deciding whether a graph admits a straight-line drawing with spanning ratio $1$, a proper straight-line drawing with spanning ratio $1$, and a planar straight-line drawing with spanning ratio $1$ are NP-complete, $\exists \mathbb R$-complete, and linear-time solvable problems, respectively, where a drawing is proper if no two vertices overlap and no edge overlaps a vertex. Second, we show that moving from spanning ratio $1$ to spanning ratio $1+ε$ allows us to draw every graph. Namely, we prove that, for every $ε>0$, every (planar) graph admits a proper (resp. planar) straight-line drawing with spanning ratio smaller than $1+ε$. Third, our drawings with spanning ratio smaller than $1+ε$ have large edge-length ratio, that is, the ratio between the length of the longest edge and the length of the shortest edge is exponential. We show that this is sometimes unavoidable. More generally, we identify having bounded toughness as the criterion that distinguishes graphs that admit straight-line drawings with constant spanning ratio and polynomial edge-length ratio from graphs that require exponential edge-length ratio in any straight-line drawing with constant spanning ratio.

A drawing of a graph in the plane is a thrackle if every pair of edges intersects exactly once, either at a common vertex or at a proper crossing. Conway's conjecture states that a thrackle has at most as many edges as vertices. In this paper, we investigate the edge-vertex ratio of maximal thrackles, that is, thrackles in which no edge between already existing vertices can be inserted such that the resulting drawing remains a thrackle. For maximal geometric and topological thrackles, we show that the edge-vertex ratio can be arbitrarily small. When forbidding isolated vertices, the edge-vertex ratio of maximal geometric thrackles can be arbitrarily close to the natural lower bound of 1/2. For maximal topological thrackles without isolated vertices, we present an infinite family with an edge-vertex ratio of 5/6.

Let $D$ be a straight-line drawing of a graph. The rectilinear 2-colored crossing number of $D$ is the minimum number of crossings between edges of the same color, taken over all possible 2-colorings of the edges of $D$. First, we show lower and upper bounds on the rectilinear 2-colored crossing number for the complete graph $K_n$. To obtain this result, we prove that asymptotic bounds can be derived from optimal and near-optimal instances with few vertices. We obtain such instances using a combination of heuristics and integer programming. Second, for any fixed drawing of $K_n$, we improve the bound on the ratio between its rectilinear 2-colored crossing number and its rectilinear crossing number.

In order to have a compact visualization of the order type of a given point set S, we are interested in geometric graphs on S with few edges that unambiguously display the order type of S. We introduce the concept of exit edges, which prevent the order type from changing under continuous motion of vertices. That is, in the geometric graph on S whose edges are the exit edges, in order to change the order type of S, at least one vertex needs to move across an exit edge. Exit edges have a natural dual characterization, which allows us to efficiently compute them and to bound their number.

Plane perfect matchings of $2n$ points in convex position are in bijection with triangulations of convex polygons of size $n+2$. Edge flips are a classic operation to perform local changes both structures have in common. In this work, we use the explicit bijection from Aichholzer et al. (2018) to determine the effect of an edge flip on the one side of the bijection to the other side, that is, we show how the two different types of edge flips are related. Moreover, we give an algebraic interpretation of the flip graph of triangulations in terms of elements of the corresponding Temperley-Lieb algebra.