arXiv++ Combinatorics

We study properties and applications of various circuit imbalance measures associated with linear spaces. These measures describe possible ratios between nonzero entries of support-minimal nonzero vectors of the space. The fractional circuit imbalance measure turns out to be a crucial parameter in the context of linear programming, and two integer variants can be used to describe integrality properties of associated polyhedra. We give an overview of the properties of these measures, and survey classical and recent applications, in particular, for linear programming algorithms with running time dependence on the constraint matrix only, and for circuit augmentation algorithms. We also present new bounds on the diameter and circuit diameter of polyhedra in terms of the fractional circuit imbalance measure.

We study a new invariant of circular planar electrical networks, well known to phylogeneticists: the circular split system. We use our invariant to answer some open questions about levels of complexity of networks and their related Kalmanson metrics. The key to our analysis is the realization that certain matrices arising from weighted split systems are studied in another guise: the Kron reductions of Laplacian matrices of planar electrical networks. Specifically we show that a response matrix of a circular planar electrical network corresponds to a unique resistance metric obeying the Kalmanson condition, and thus a unique weighted circular split system. Our results allow interchange of methods: phylogenetic reconstruction using theorems about electrical networks, and circuit reconstruction using phylogenetic techniques.

We consider the identifiability problem for the parameters of series-parallel LCR circuit networks. We prove that for networks with only two classes of components (inductor-capacitor (LC), inductor-resistor (LR), and capacitor-resistor (RC)), the parameters are identifiable if and only if the number of non-monic coefficients of the constitutive equations equals the number of parameters. The notion of the "type" of the constitutive equations plays a key role in the identifiability of LC, LR, and RC networks. We also investigate the general series-parallel LCR circuits (with all three classes of components), and classify the types of constitutive equations that can arise, showing that there are 22 different types. However, we produce an example that shows that the basic notion of type that works to classify identifiability of two class networks is not sufficient to classify the identifiability of general series-parallel LCR circuits.

The reliability of a network is an important parameter to consider when building a network. Different characteristics of the network can become unreliable over time or from other outside forces. In a simple setting, we model a network as a graph where the vertices represent our objects and a connection between these objects are represented by an edge. Generally there are two things to consider when discussing the reliability of a network. The first is the conditions that need to be satisfied in order for the network to be operational. We can also consider what properties need to be satisfied in order to render our network inoperable. The second thing we need to consider is what properties of our network tend to fail. In certain applications edges are prone to failure and in others vertices are prone to failure. One of the first examples of a network reliability measure is the connectivity of a graph, which measures the minimum number of vertices (or edges) which can be removed in order to disconnect the graph. In this paper we extend this idea, however, instead of considering a network to be operational if there is a component of order larger than a fixed size, k, we define the network to be operational if there is a component of order at least some proportion of the original order. So as our networks become larger, we will need a component of proportionally larger order to remain if the network is to be in an operating state. This connectivity measure has been studied for $r=1/2$ and for the purposes of VLSI circuit design, but we explore the measure for all $0< r <1$.

The colouring defect of a cubic graph, introduced by Steffen in 2015, is the minimum number of edges that are left uncovered by any set of three perfect matchings. Since a cubic graph has defect $0$ if and only if it is $3$-edge-colourable, this invariant can measure how much a cubic graph differs from a $3$-edge-colourable graph. Our aim is to examine the relationship of colouring defect to oddness, an extensively studied measure of uncolourability of cubic graphs, defined as the smallest number of odd circuits in a $2$-factor. We show that there exist cyclically $5$-edge-connected snarks (cubic graphs with no $3$-edge-colouring) of oddness $2$ and arbitrarily large colouring defect. This result is achieved by means of a construction of cyclically $5$-edge-connected snarks with oddness $2$ and arbitrarily large girth. The fact that our graphs are cyclically $5$-edge-connected significantly strengthens a similar result of Jin and Steffen (2017), which only guarantees graphs with cyclic connectivity at most $3$. At the same time, our result improves Kochol's original construction of snarks with large girth (1996) in that it provides infinitely many nontrivial snarks of any prescribed girth $g\ge 5$, not just girth at least~$g$.

We introduce the notion of real phase structure on rational polyhedral fans in Euclidean space. Such a structure consists of an assignment of affine spaces over $\mathbb{Z}/2\mathbb{Z}$ to each top dimensional face of the fan subject to two conditions. Given an oriented matroid we can construct a real phase structure on the fan of the underlying matroid. Conversely, we show that from a real phase structure on a matroid fan we can produce an orientation of the underlying matroid. Thus real phase structures are cryptomorphic to matroid orientations. The topes of the orientated matroid are recovered immediately from the real phase structure. We also provide a direct way to recover the signed circuits of the oriented matroid from the real phase structure.

A continuous-time quantum walk on a dynamic graph evolves by Schrödinger's equation with a sequence of Hamiltonians encoding the edges of the graph. This process is universal for quantum computing, but in general, the dynamic graph that implements a quantum circuit can be quite complicated. In this paper, we give six scenarios under which a dynamic graph can be simplified, and they exploit commuting graphs, identical graphs, perfect state transfer, complementary graphs, isolated vertices, and uniform mixing on the hypercube. As examples, we simplify dynamic graphs, in some instances allowing single-qubit gates to be implemented in parallel.

We explore four approaches to the question of defectivity for a complex projective toric variety $X_A$ associated with an integral configuration $A$. The explicit tropicalization of the dual variety $X_A^\vee$ due to Dickenstein, Feichtner, and Sturmfels allows for the computation of the defect in terms of an affine combinatorial invariant $ρ(A)$. We express $ρ(A)$ in terms of affine invariants $ι(A)$ associated to Esterov's iterated circuits and $λ(A)$, an invariant defined by Curran and Cattani in terms of a Gale dual of $A$. Thus we obtain formulae for the dual defect in terms of iterated circuits and Gale duals. An alternative expression for the dual defect of $X_A$ is given by Furukawa-Ito in terms of Cayley decompositions of $A$. We give a Gale dual interpretation of these decompositions and apply it to the study of defective configurations.

A well-known result of Brylawski constructs an elementary lift of a matroid $M$ from a linear class of circuits of $M$. We generalize this result by showing how to construct a rank-$k$ lift of $M$ from a rank-$k$ matroid on the set of circuits of $M$. We conjecture that every lift of $M$ arises via this construction. We then apply this result to group-labeled graphs, generalizing a construction of Zaslavsky. Given a graph $G$ with edges labeled by a group, Zaslavsky's lift matroid $K$ is an elementary lift of the graphic matroid $M(G)$ that respects the group-labeling; specifically, the cycles of $G$ that are circuits of $K$ coincide with the cycles that are balanced with respect to the group-labeling. For $k \ge 2$, when does there exist a rank-$k$ lift of $M(G)$ that respects the group-labeling in this same sense? For abelian groups, we show that such a matroid exists if and only if the group is isomorphic to the additive group of a non-prime finite field.

Motivated by Gilbreath's conjecture, we develop the notion of the gap sequence induced by any sequence of numbers. We introduce the notion of the path and associated circuits induced by an originator and study the conjecture via the notion of the trace and length of a path.

In the theory of classical matroids, there are several known equivalent axiomatic systems that define a matroid, which are described as matroid cryptomorphisms. A q-matroid is a q-analogue of a matroid where subspaces play the role of the subsets in the classical theory. In this article we establish cryptomorphisms of q-matroids. In doing so we highlight the difference between classical theory and its q-analogue. We introduce a comprehensive set of q-matroid axiom systems and show cryptomorphisms between them and existing axiom systems of a q-matroid. These axioms are described as the rank, closure, basis, independence, dependence, circuit, hyperplane, flat, open space, spanning space, non-spanning space, and bi-colouring axioms.

Sublinear circuits are generalizations of the affine circuits in matroid theory, and they arise as the convex-combinatorial core underlying constrained non-negativity certificates of exponential sums and of polynomials based on the arithmetic-geometric inequality. Here, we study the polyhedral combinatorics of sublinear circuits for polyhedral constraint sets. We give results on the relation between the sublinear circuits and their supports and provide necessary as well as sufficient criteria for sublinear circuits. Based on these characterizations, we provide some explicit results and enumerations for two prominent polyhedral cases, namely the non-negative orthant and the cube $[-1,1]^n$.

Motivated by a rigidity-theoretic perspective on the Localization Problem in 2D, we develop an algorithm for computing circuit polynomials in the algebraic rigidity matroid associated to the Cayley-Menger ideal for $n$ points in 2D. We introduce combinatorial resultants, a new operation on graphs that captures properties of the Sylvester resultant of two polynomials in the algebraic rigidity matroid. We show that every rigidity circuit has a construction tree from $K_4$ graphs based on this operation. Our algorithm performs an algebraic elimination guided by the construction tree, and uses classical resultants, factorization and ideal membership. To demonstrate its effectiveness, we implemented our algorithm in Mathematica: it took less than 15 seconds on an example where a Groebner Basis calculation took 5 days and 6 hrs.

We introduce a natural temporal analogue of Eulerian circuits and prove that, in contrast with the static case, it is NP-hard to determine whether a given temporal graph is temporally Eulerian even if strong restrictions are placed on the structure of the underlying graph and each edge is active at only three times. However, we do obtain an FPT-algorithm with respect to a new parameter called interval-membership-width which restricts the times assigned to different edges; we believe that this parameter will be of independent interest for other temporal graph problems. Our techniques also allow us to resolve two open question of Akrida, Mertzios and Spirakis [CIAC 2019] concerning a related problem of exploring temporal stars. Furthermore, we introduce a vertex-variant of interval-membership-width (which can be arbitrarily larger than its edge-counterpart) and use it to obtain an FPT-time algorithm for a natural vertex-exploration problem that remains hard even when interval-membership-width is bounded.

The rigidity of a matrix $A$ for target rank $r$ is the minimum number of entries of $A$ that need to be changed in order to obtain a matrix of rank at most $r$. At MFCS'77, Valiant introduced matrix rigidity as a tool to prove circuit lower bounds for linear functions and since then this notion received much attention and found applications in other areas of complexity theory. The problem of constructing an explicit family of matrices that are sufficiently rigid for Valiant's reduction (Valiant-rigid) still remains open. Moreover, since 2017 most of the long-studied candidates have been shown not to be Valiant-rigid. Some of those former candidates for rigidity are Kronecker products of small matrices. In a recent paper (STOC'21), Alman gave a general non-rigidity result for such matrices: he showed that if an $n\times n$ matrix $A$ (over any field) is a Kronecker product of $d\times d$ matrices $M_1,\dots, M_k$ (so $n=d^k$) $(d\ge 2)$ then changing only $n^{1+\varepsilon}$ entries of $A$ one can reduce its rank to $\le n^{1-γ}$, where $1/γ$ is roughly $2^d/\varepsilon^2$. In this note we improve this result in two directions. First, we do not require the matrices $M_i$ to have equal size. Second, we reduce $1/γ$ from exponential in $d$ to roughly $d^{3/2}/\varepsilon^2$ (where $d$ is the maximum size of the matrices $M_i$), and to nearly linear (roughly $d/\varepsilon^2$) for matrices $M_i$ of sizes within a constant factor of each other. As an application of our results we significantly expand the class of Hadamard matrices that are known not to be Valiant-rigid; these now include the Kronecker products of Paley-Hadamard matrices and Hadamard matrices of bounded size.

In this paper, we define the notion of rigidity for linear electrical multiports and for matroid pairs. We show the parallel between the two and study the consequences of this parallel. We present applications to testing, using purely matroidal methods, whether a connection of rigid multiports yields a linear network with unique solution. We also indicate that rigidity can be regarded as the closest notion to duality that can be hoped for, when the spaces correspond to different physical constraints, such as topological and device characteristic. A multiport is an ordered pair $(\V^1_{AB},\A^2_{B}),$ where $\V^1_{AB}$ is the solution space on $A\uplus B$ of the Kirchhoff current and voltage equations of the graph of the multiport and $\A^2_{B}\equivd α_B+\V^2_B$ is the device characteristic of the multiport, with $A$ corresponding to port voltages and currents and $B$ corresponding to internal voltages and currents. The pair $\{\V^1_{AB},α_B+\V^2_{B}\}$ is said to be rigid iff it has a solution $(x_A,x_B)$ for every vector $α_B$ and given a restriction $x_A$ of the solution, $x_B$ is unique. A matroid $\M_S$ on $S,$ is a family of `independent' sets with the property that maximal independent sets contained in any given subset of $S$ have the same cardinality. The pair $\{\M^1_{AB},\M^2_{B}\}$ is said to be rigid iff the two matroids have disjoint bases which cover $B.$ We show that the properties of rigid pairs of matroids closely parallel those of rigid multiports. We use the methods developed in the paper to show that a multiport with independent and controlled sources and positive or negative resistors, whose parameters can be taken to be algebraically independent over $\Q,$ is rigid, if certain simple topological conditions are satisfied by the device edges.

For a matrix $M$ and a positive integer $r$, the rank $r$ rigidity of $M$ is the smallest number of entries of $M$ which one must change to make its rank at most $r$. There are many known applications of rigidity lower bounds to a variety of areas in complexity theory, but fewer known applications of rigidity upper bounds. In this paper, we use rigidity upper bounds to prove new upper bounds in a few different models of computation. Our results include: $\bullet$ For any $d> 1$, and over any field $\mathbb{F}$, the $N \times N$ Walsh-Hadamard transform has a depth-$d$ linear circuit of size $O(d \cdot N^{1 + 0.96/d})$. This circumvents a known lower bound of $Ω(d \cdot N^{1 + 1/d})$ for circuits with bounded coefficients over $\mathbb{C}$ by Pudlák (2000), by using coefficients of magnitude polynomial in $N$. Our construction also generalizes to linear transformations given by a Kronecker power of any fixed $2 \times 2$ matrix. $\bullet$ The $N \times N$ Walsh-Hadamard transform has a linear circuit of size $\leq (1.81 + o(1)) N \log_2 N$, improving on the bound of $\approx 1.88 N \log_2 N$ which one obtains from the standard fast Walsh-Hadamard transform. $\bullet$ A new rigidity upper bound, showing that the following classes of matrices are not rigid enough to prove circuit lower bounds using Valiant's approach: $-$ for any field $\mathbb{F}$ and any function $f : \{0,1\}^n \to \mathbb{F}$, the matrix $V_f \in \mathbb{F}^{2^n \times 2^n}$ given by, for any $x,y \in \{0,1\}^n$, $V_f[x,y] = f(x \wedge y)$, and $-$ for any field $\mathbb{F}$ and any fixed-size matrices $M_1, \ldots, M_n \in \mathbb{F}^{q \times q}$, the Kronecker product $M_1 \otimes M_2 \otimes \cdots \otimes M_n$. This generalizes recent results on non-rigidity, using a simpler approach which avoids needing the polynomial method.

Let us consider a parametric weighted directed graph in which every arc $(j,i)$ has weight of the form $w((j,i))=\max(P_{ij}+λ,I_{ij}-λ,C_{ij})$, where $λ$ is a real parameter and $P$, $I$ and $C$ are arbitrary square matrices with elements in $\mathbb{R}\cup\{-\infty\}$. In this paper, we design an algorithm that solves the Non-positive Circuit weight Problem (NCP) on this class of parametric graphs, which consists in finding all values of $λ$ such that the graph does not contain circuits with positive weight. This problem, which generalizes other instances of the NCP previously investigated in the literature, has applications in the consistency analysis of a class of discrete-event systems called P-time event graphs. The proposed algorithm is based on max-plus algebra and formal languages, and improves the worst-case complexity of other existing approaches, achieving strongly polynomial time complexity $\mathcal{O}(n^4)$ (where $n$ is the number of nodes in the graph).

This work regards the order polytopes arising from the class of generalized snake posets and their posets of meet-irreducible elements. Among generalized snake posets of the same rank, we characterize those whose order polytopes have minimal and maximal volume. We give a combinatorial characterization of the circuits in these order polytopes and then conclude that every triangulation is unimodular. For a generalized snake word, we count the number of flips for the canonical triangulation of these order polytopes. We determine that the flip graph of the order polytope of the poset whose lattice of filters comes from a ladder is the Cayley graph of a symmetric group. Lastly, we introduce an operation on triangulations called twists and prove that twists preserve regular triangulations.

Let $\cX$ be a family of subsets of a finite set $E$. A matroid on $E$ is called an $\cX$-matroid if each set in $\cX$ is a circuit. We consider the problem of determining when there exists a unique maximal $\cX$-matroid in the weak order poset of all $\cX$-matroids on $E$, and characterizing its rank function when it exists.